Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-DUCT 902LP, 5gm kit
Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-DUCT 902LP, 5gm kit by Atom Adhesives at Steel City Robotics. MPN: AA-DUCT 902LP-5. Hurry! Limited time offer. Offer valid only while supplies last. AA-DUCT 902LP is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm-cm. AA-DUCT 902LP is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 902LP is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver
Product Description & Reviews
AA-DUCT 902LP is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm-cm. AA-DUCT 902LP is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 902LP is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver Cure Type Heat cure or Room temperature Benefits High strength Perfect bond Cold solder for heat sensitive components Mix Ratio by weight 100/7 / Resin/Hardener Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Operating Temperature -60 to 150 °C Typical Applications Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair UNCURED PROPERTIES: Viscosity At 25 °C cps Paste Specific Gravity, mixed 2.79 Reactive solids contents, % 100 Pot Life 3 hours CURE SCHEDULE: 2 minutes At 120°C 5 minutes At 100°C H12 hours At 25°C MISC PROPERTIES Hardness, Shore D 83 Shrinkage linear in/in 0.003 Lap shear strength, psi 9600 Volume Resistivity ohm cm Greater than 0.0001 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information.
Features & Highlights
- Spec. Gravity 2.79 g/cc Mixed Viscosity Paste At 25°C Reactive solids contents, % 100,Pot Life 3 hrs
- Hardness, Shore D 83 Adhesive Operating
- Volume Resistivity > 0.0001,Shrinkage linear in/in 0.003 Lap shear strength, psi 9600
- Operating Temperature --50 to +170 °C,Appearance Silver
- Cure Time 2 minutes At 120°C,5 minutes At 100°C,12 hours At 25°C
Additional Information
Manufacturer:
Atom Adhesives
Category:
Conductive Adhesives
Part Number:
AA-DUCT 902LP-5
Item Size:
6 x 7 x 6 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By PERMABOND
Specification:Viscosity cP: 200 - 300Chemical Base: Urethane MethacrylateColor: ClearPhysical Form: LiquidApplication: PlasticContainer Size: 50 mLTem...
By AIYUNNI
mpn: AIYUNNI-22, ean: 0704619606911,
Product Feature: - Each roll is 21.9yards long & 2 inch wide. - Heat preservation, heat insulation - Waterproof, cold and heat resistance ...
By Epoxy International
mpn: Nickel-Bond 3-50,
Mix Ratio by weight: 100:5 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, ph...
By Epoxy International
mpn: Flexible-Silver 16-2.5,
Mix Ratio by weight: 100:115 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, ...