Prince Manufacturing HC-PTO-1AC PTO Pump, Cast Iron


Mega Sale! Free Shipping Included! Save 24% on the Prince Manufacturing HC-PTO-1AC PTO Pump, Cast Iron by Prince Manufacturing at Steel City Robotics. MPN: HC-PTO-1AC. Hurry! Limited time offer. Offer valid only while supplies last. PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Cast Iron, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found


Images:
Prince Manufacturing HC-PTO-1AC PTO Pump, Cast Iron by Prince Manufacturing (Image #1)
4.8 out of 5 stars with 78 reviews
Condition: New
Availability: In Stock
$807.20
$619.99
You Save: 23%


Quantity:  

 


View More In Gear Pumps.

Product Description & Reviews

PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Cast Iron, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found in traditional pumps or imported pumps.

Features & Highlights

  • Prince PTO pumps have self adjusting wear plates that seal around the two unequal size gears, These plates activated by internal fluid pressure, offset wear or expansion
  • All pumps are provided with an inlet port adapter (SAE O-ring boss to hose barb) and outlet port adapter (SAE O-ring boss to female pipe threads)
  • Oil operating temperature should not exceed 180 degrees F; If it does, the reservoir may be too small or a heat exchanger may be needed
  • Prince PTO pumps are designed to operate at up to 100% of standard PTO shaft speeds; Standard speeds are 540 rpm and 1000 rpm
  • Prince pumps are designed for 2250 PSI max, relief valve setting; A relief valve, external to the pump, must be provided in the system

Additional Information

Brand:
Prince Manufacturing
Manufacturer:
Prince Manufacturing Corporation
Category:
Gear Pumps
Color:
Gray
Model:
HC-PTO-1AC
MPN:
HC-PTO-1AC
Part Number:
HC-PTO-1AC
Publisher:
Prince Manufacturing Corporation
Binding:
Misc.
Item Size:
11 x 9 x 9 inches
Package Weight:
53.8 pounds
Package Size:
9 x 8.5 x 10.5 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Fuelworks 10305708A 12V 15GPM Fuel Transfer Pump Kit with 14' Hose, Extensible Suction Tube and Manual Nozzle, Black
By Fuelworks
mpn: 10305708A, ean: 6943940730023,
12V 15 GPM fuel transfer pump Kit.The explosion proof fuel transfer pump is designed for tank or barrel mounting to dispense flammable liquids like ga...

Hydraulic Gear Pump, 1.4 cu in/rev
By Concentric
mpn: NA, ean: 7440004226236,
Hydraulic Gear Pump, Displacement (Cu. In./Rev.) 1.4, Nominal GPM @ 1200 RPM 7.25, GPM @ 1800 RPM & 1000 PSI 10.5, Max. Continuous PSI 3200, Max. RPM ...

TBWOODS V003-4000 CASE HSV13
By TB Woods
.

Gear Pump, 0.305 cu in/rev, 4000 PSI Max
By Concentric
mpn: NA, ean: 7440004426407,
Hydraulic Gear Pump, Displacement (Cu. In./Rev.) 0.305, Nominal GPM @ 1200 RPM 1.6, GPM @ 1800 RPM & 1000 PSI 2.2, GPM @ 3600 RPM & 1000 PSI 4.5, Max....



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.