3D Printer Controllers - Page 2 - Extreame Savings! Save up to 48%

Extreame Savings! Up to 48% off on 3D Printer Controllers at Steel City Robotics, Page 2. Top brands include SainSmart, HESAI, FidgetFidget, KINGPRINT, Kuman, Haoun, Qibei, Gowoops, Simmper, ReliaBot, UMProb, GIFC, Davitu 3D Printer & Supplies, Jennyfly, OSOYOO, & BIQU. Hurry! Limited time offers. Offers valid only while supplies last.

SainSmart 3D Printer controller 3D Printer Control Board Ramps 1.4 for Reprap Mendel Prusa Arduino Mega2560 Mega1280
By SainSmart
In Stock

mpn: 101-91-100, ean: 6955170832255,

4.0 out of 5 stars with 10 reviews
Overview : It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Sainsmart Mega with the powerful Sainsmart MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Sainsmart MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Sainsmart expansion boards can be added to the system as long as the

HESAI 3D Printer Kit Smart Parts RAMPS 1.4 Controller Control Panel LCD 2004 Module Display Monitor Motherboard Blue Screen
In Stock

mpn: A126-3D2004, ean: 0732240562542,

4.8 out of 5 stars with 8 reviews
Description:The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using ''smart adapter'' included. This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the

FidgetFidget Controller Board MKS Base V1.5 3D Printer for Ramps 1.4 + Mega 2560 + A4988 L1M7
By FidgetFidget
In Stock

mpn: niujinmingUSW-SACHIN-911-5F72348F83, ean: 6954250584978,

4.4 out of 5 stars with 138 reviews
This MKS BASE V1.5 3D printer controller for RAMPS 1.4 is a control board module with rich features & all-in-one electronics solution for Reprap and other CNC devices. It features an onboard ATmega2560 and its five motor outputs are powered by A4982 stepper drivers. The board can use the same firmware as Ramps1.4. MKS BASE is designed to be flexible in the user's power source availability, allowing any power supply from 12V-24V. MKS BASE is suitable for 3D printer manufacturers on batch

KINGPRINT Upgraded LCD 2004 Graphic Smart Display Controller Module with Adapter for 3D Printer
In Stock

mpn: KINGPRINT-PXS000030, ean: 0603894529635,

4.8 out of 5 stars with 99 reviews
Specification: 2004LCD With Smart LCD Controller you can print 3D designs without USB connection to your computer. Package included: 1 * LCD 2004 Graphic Display 2 * 30mm cables-Popular RepRap 3D Printer LCD Controller and SD Card Reader. -The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. -You can easily connect it to your RAMPS 1.4 board using ''smart adapter'' included. -3D design print without a computer, just use the G code

KINGPRINT TFT35 v1.1 Control Panel 3.5-inch Full-Color Touch-Screen LCD Compatible With 3D Printer MKS TFT Control Board
In Stock

mpn: KINGPRINT-3D0441A004, ean: 0603894528911,

4.6 out of 5 stars with 114 reviews
The boot logo and all buttons can design their own interfaces. Increase the custom function button. Support full English interface. Package Included: 1* TFT35 v1.1 touch screen 1 * cable3.5 inch color touch screen, Provide continuous software upgrades, easy to upgrade.. The master program without modification, plug and play, support Marlin, Repetier, Smoothieware firmware.. TFT35 V1.1 can support the image customization, boot logo, all button images can be designed.. TFT35 V1.1 can support 7

Professional CNC Kit for arduino, kuman GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor
By Kuman
In Stock
You Save: 27%

mpn: KB02-UK,

4.4 out of 5 stars with 126 reviews
CNC Shield Board: Latest CNC Shield Version 3.0 for arduino GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis Coolant enable Compatible with A4988 or DRV8825 stepper driver Runs on 12-36V DC DRV8825 Stepper Motor Driver: Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It's not arduino official board but it's compatible with all arduino software and hardware)

Creality 3D Printer Display Screen with Encoder Screen for CR-10S
By Haoun
In Stock

mpn: T153299V5FJ, ean: 6247736381810,

4.3 out of 5 stars with 12 reviews
Specifications:.Material: Liquid Crystal Display.Product Weight: 133gPackage Content:.1 x DisplayApplication: Suitable for CR-10S Model 3D printer.. Made of Liquid Crystal material,durable to use.. Comes with encoder, can realize parameter adjustment and select file..

ANET A8 Mainboard Upgraded Replacement Controller Board V1.5 Motherboard 12V-24V for ANET A8 Prusa i3 3D Printer
By Qibei
In Stock

mpn: Q_0020,

4.7 out of 5 stars with 22 reviews
Key points: 1.Its comes with a firmware loaded, no need to flash. 2.Voltage input for this board is 12V. 3. Works with the Anet A8 series single extruder. 4.This is a drop-in replacement for the anet a8 Prusa i3 printers, easy for operation. Mainboard specification: Model name: Anet a8 motherboard Brand: Anet Suitable for: Anet A8 3D Printer Voltage Input: 12V - 24V Mainboard Size: 10 * 9.5 * 2cm / 3.9 * 3.7 * 0.8in Mainboard Weight: 63g / 2.2oz Package Size: 12 * 11 * 3cm / 4.7 * 4.3

Gowoops 3D Printer kit CNC Shield V3 Expansion Board + UNO R3 Board + 4PCS DRV8825 Step Motor Driver with Heatsinks for Arduino
By Gowoops
In Stock
You Save: 48%

mpn: ZZDBAD8825, ean: 0705586405279,

4.4 out of 5 stars with 38 reviews
Arduino CNC Shield V3.0 Installation Guide: http://osoyoo.com/?p=4783 CNC Shield Board: (learn more information, pls go to the ASIN: B0157ZZ28M) Please note that this is an unassembled kit and Basic soldering skills are needed Arduino UNO R3 Board: MCU: ATmega328 USB interface: ATmega16U2 Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 I-I/O pin output current: 40mA max 3.3V output current: 150mA max Flash memory: 32 kB (0.5kB used by

SIMPZIA 3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module - 4 Pack
By Simmper
In Stock

mpn: OP-3DPHBP-4K, ean: 0712217513340,

4.0 out of 5 stars with 57 reviews
Features: Color: Black Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22'' Mounting holes: 3.2mm diameter, for M3 screws. Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink. This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this) Note: This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.

ReliaBot Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module Over 30A 12V or 24V for 3D Printer
By ReliaBot
In Stock
You Save: 27%

mpn: RD005, ean: 0650226282256,

4.5 out of 5 stars with 7 reviews
Packing list: 1 * Heating Controller (12V / 24V , Over 30A) for 3D Printer Hotbed 1 * 30cm signal cable for hotbedVoltage: 12V or 24V; Max Current: over 30A. Maximum current of the MOSFET: 280A. Maximum power of hot bed: Over 360W (12V) or 720W (24V). Make sure that the cables that connect to the controller board can withstand high current.. We recommend using a 24V power supply when using a heated bed with high power.

KINGPRINT MKS-Gen V1.4 Controller Board+5PCS DRV8825 Stepper Motor Mega 2560 Motherboard RepRap Ramps1.4 Compatible +USB Cable for 3D Printer
In Stock

mpn: 43217-33003, ean: 0603894529390,

4.3 out of 5 stars with 87 reviews
Specification: Can be connected to the control panel and 12864LCD Ramps1.4,2004LCD control panel.(Can't be sure to match all of stype of 12864LCD and 2004LCD ) MEGA2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS1.4 combination of interfaces, the problem of failure prone. Support up to 5 motor driver (A4988 or DRV8825). Using a dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps. Package Included: 5 * DRV8825S Stepper

KINGPRINT NEW 3D Printer Control Board MKS BASE Development Board V1.5 Board RepRap Ramps1.4 Compatible
In Stock

mpn: KINGPRINT-ZZB000013, ean: 0603894529413,

4.6 out of 5 stars with 82 reviews
Specification: -MKS BASE is a feature rich all-in-one electronics solution for Reprap and other CNC devices. -It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers. -The board can use the same firmware as Ramps1.4. MKS Base is designed to be flexible in the user's power source availability, allowing any power supply from 12V-24V. -6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax. -MKS-BASE is suitable for 3D printer

TL-Smoother PLUS addon Module for 3D Pinter Motor Drivers Motor Driver Terminator for reprap mk8 i3 (4 Pack)
By UMProb
In Stock

ean: 0732240563341,

4.3 out of 5 stars with 19 reviews
Description: The TL-Smoother is an addon module for 3D printer stepper motor drivers.The board provides flyback diodes(freewheeling diodes) for the motor outputs,so that they are also protected against induction voltages in the unpowered state of the driver.You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers or A4988/2 drivers. The color of the product is based on actual conditions. 8 big Package(SMC)diodes provides better heat dissipation

GIFC Fashion Women's Bow Lace Ankle Boots Flat Round Toe Retro Cotton Fabric Casual Suede Single Boots
In Stock

ean: 0799940191939,

4.7 out of 5 stars with 42 reviews
❤️Welcome to our shop, dear friends! Our store is called wang-hao. we love every customer's business with us. ♥ ❤️Product details: Size(CN):35 Foot Length:22.0-22.5cm/8.7-8.9'' Foot wide:8.5cm/3.3'' EU:36 UK:3 US:5.5 Size(CN):36 Foot Length:22.5-23.0cm/8.9-9.1'' Foot wide:8.5-9cm/3.3-3.5'' EU:36.5 UK:3.5 US:6 Size(CN):37 Foot Length:23.0-23.5cm/9.1-9.3'' Foot wide:9cm/3.5'' EU:37 UK:4 US:6.5 Size(CN):38 Foot Length:23.5-24.0cm/9.3-9.5'' Foot wide:9-9.5cm/3.5-3.7'' EU:38 UK:4.5

KINGPRINT Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps 1.4/1.5 for 3D Printer Board
In Stock

mpn: KINGPRINT-ZZB000164A, ean: 0603894529680,

4.7 out of 5 stars with 137 reviews
Product features1. Supports up to 5 motor drivers with the standard A4988 / DRV8825 Pololu interface 2. Simple and convenient Connection, larger power than Ramps 1.5/1.4, Better Heat Dissipation with heat sink3.The features of multiple extended interface and replaceable parts make RAMPS1.6 become a control board with powerful upgrade capability and scalable modularity.4. 5A additional security and component protection fusion. Notes: 1. The heat sink has to be installed when you use this board

Reprap Ramps1.4 RRD Fan Extender for 3D Printer Reprap with 2 Channels
By Davitu 3D Printer & Supplies
In Stock

mpn: DVT-1135466436, ean: 0754628612595,

4.3 out of 5 stars with 131 reviews
Descriptions:- If you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruders) including a heated bed all the output ports (D8, D9, D10) will be used. In this case, there is no option to connect a firmware controlled FAN to RAMPS board directly. However, in Sprinter/Marlin firmware there is an option already (Marlin: BOARD=34) which redirects the FAN to RAMPS output D4. But this solution needs a ''buffer/driver'' in order to work.- The RRD-FAN-EXTENDER is exactly what you need in

Jennyfly Protective Cover for Galaxy Tab S3 9.7 inch Retro Fashion Luxury PU Leather Smart Protective Case with Card Slot Hand Free Book Style Stand Tablet Case for Samsung Galaxy Tab S3 9.7- Gray
By Jennyfly
In Stock

ean: 8011583289586,

4.5 out of 5 stars with 39 reviews
Welcome to shopping from Jennyfly store! Looking for a High-quality iPad case? Just Try Jennyfly iPad Protective Case ! Why choose Jennyfly store? Give you 100% Satisfaction Guaranteed. More considerate services for you. More reliable quality products. Delivery reliable, with tracked details. All of our product through Strict Inspection before leaving the factory. We ensure provide high quality product to our all customers. - Premium synthetic leather exterior perfectly protects the

OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap
In Stock

mpn: 12864-3D, ean: 0701948408902,

4.6 out of 5 stars with 45 reviews
3D printer Kit guide: http://osoyoo.com/driver/3D%20printer%20instructions.pdf Caution: 1) The max power supply for these ramps is 12V and the max watts is about 180W. The max watts for the hotbed is about 100W and the max temperature is just 50 degree Celsius. 2) Do not plug or unplug and wire or module when power is on, do not even touch the board when power is on or your hand has static charge(you can remove static charge by touching metal tap) . 3) Always double check power wire is

KINGPRINT Rumba 3D Printer Control Board with USB Cable for 3D Printer
In Stock

mpn: 43217-146645, ean: 0603894528881,

4.3 out of 5 stars with 90 reviews
Rumba is the core of a 3D printer, carver, laser cutter and other CNC 1.5pcs temperature sensor interface input; 2.All pins are drawn to facilitate more features to expand. 3.Servo expansion interface, easy to add automatic leveling function; 4.PWM DC output (heating pipe, fan, etc.): 6-way output (one-way high-current, 3-way current, 2-way low-current), low on-resistance high-performance tube do Mos drive output as with LED indication. 5.Power section: Power input is 12V-35V, dual power

Viewing Page 2 of 4

View more products in 3D Printer Parts & Accessories.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.