3D Printer Parts & Accessories - Blowout Sale! Save up to 54%


Blowout Sale! Up to 54% off on 3D Printer Parts & Accessories at Steel City Robotics. Top brands include Wellzoom, HiLetgo, Foreasy, GO-3D PRINT, ExcelFu, NOBLE 3D HARDCORE, DRILLPRO, Wangdd22, SIQUK, CCTREE, BuildTak, Gizmo Dorks, Stratasys, Filabot, LulzBot, Camping Family, Ivelink, Wiiboox, & ELEGOO. Hurry! Limited time offers. Offers valid only while supplies last.



Wellzoom B2 Desktop filament extruder
Wellzoom B2 Desktop filament extruder
By Wellzoom
In Stock
$598.00

mpn: B2, ean: 0602716544634,

4.1 out of 5 stars with 67 reviews
Wellzoom B2 desktop filament extruder specifically designed for non-professionals. It is based on minimalism, easy to operate. It has the speed control function. Because the use of a stepping motor, it has better scalability. Transparent hopper, allowing you to know whether you need to add pellets. Air-cooling + self weight traction to avoid tedious debugging. User-friendly design to avoid the hot end to harm you. Specially designed plastic shell is built by handmade. Parameters: 1.Extrusion


HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
By HiLetgo
In Stock
$10.99

mpn: 3-01-1287,

4.8 out of 5 stars with 17 reviews
HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller The ESP32 integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance and RF performance is the best, safe and reliable, easy to extend to a


Foreasy 3D Printer Tool 3D Print Removal Tool Enhanced Version Set of 2
Foreasy 3D Printer Tool 3D Print Removal Tool Enhanced Version Set of 2
By Foreasy
In Stock
$19.78
$10.88
You Save: 45%

mpn: FEHE030, ean: 0707137815445,

4.5 out of 5 stars with 137 reviews
Flexible Blade Size: Small 1.96 * 0.9 in ; Long 4.52 * 0.59 in Very thin blade, Work well Suitable size, More Flexible This 3D print removal tool can help you easy get the prints off from the print bed A necessary tool set in your 3D printer tool kit, The long ones are useful for releasing larger part and the small one is useful when you want to apply force to penetrate below the 3D partFlexible Blade Size: Small 1.96 * 0.9 in ; Long 4.52 * 0.59 in. Very thin blade, Work well. Suitable size,


130mm x 160mm Borosilicate Glass Plate Bed Flat Polished Edge w/Corners Cut for Monoprice MP Select Mini 3D Print
130mm x 160mm Borosilicate Glass Plate Bed Flat Polished Edge w/Corners Cut for Monoprice MP Select Mini 3D Print
By GO-3D PRINT
In Stock
$18.95

mpn: GP 130x160CC, ean: 0799924449568,

4.5 out of 5 stars with 67 reviews
Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. For Nylon, we've found a light coating of UHU Glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use


ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer (Bonus: 2pcs hex Key Wrenches)
ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer (Bonus: 2pcs hex Key Wrenches)
By ExcelFu
In Stock
$11.59

mpn: EX207, ean: 0637673191317,

4.1 out of 5 stars with 72 reviews
ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle Print Heads and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex key wrenches) Specification of Extruder Tube: Type : Nozzle Throat Compatibility : 3D Printer Outer Thread : M6 Nozzle Throat Outer Diameter:7mm Nozzle Throat Inner Diameter:4mm Teflon Pipe Inner Diameter : 2mm Length : 30mm Filament Diameter : 1.75mm Material : Stainless Steel Specification of Brass


NOBLE 3D HARDCORE High Performance 3D Powder
NOBLE 3D HARDCORE High Performance 3D Powder
By NOBLE 3D HARDCORE
In Stock
$799.95

mpn: 861335000178, ean: 0861335000178,

4.8 out of 5 stars with 55 reviews
The HARDCORE™ High Performance 3D Powder Composite materials offer numerous capabilities to meet a variety of commercial applications. Using the ColorJet Printing (CJP) technology, 3D Systems’ ProJet® x60 3D Printers, use the HARDCORE™ High Performance 3D Powder material set to build strong, high-definition, full color concept models, assemblies and prototypes, for design realization, advanced communication, as well as development and production cost reduction. Printed models benefit


Drillpro 400mm 8mm Lead Screw ACME Lead Screw and Nut for 3D Printer Z Axis
Drillpro 400mm 8mm Lead Screw ACME Lead Screw and Nut for 3D Printer Z Axis
By DRILLPRO
In Stock
$16.65
$10.59
You Save: 36%

mpn: DRILLPROTSZYmall1592, ean: 6844762834749,

4.1 out of 5 stars with 145 reviews
400mm Lead Screw 3D Printer Z Axis Lead Screw ACME Lead Screw 8mm Screw PitchSpecifications:▶The Lead Screw Material: Stainless steel lead screw, copper nut▶The Lead Screw diameter: 8mm▶The Lead Screw Length: 400mmThe Lead Screw spacing: 2mm▶The Lead Screw of thread:8mm▶The Lead Screw Range: Reprap makerbot 3d printer accessories▶The Lead Screw 3D engraving machine lead screw 400mm length with nut.▶The Lead Screw Nut turn an around move 8mmPackage include:▶1x 400mm lead


Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit
Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit
By Wangdd22
In Stock
$18.99

mpn: LEE001, ean: 6903388514746,

4.5 out of 5 stars with 39 reviews
Description:Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.Notice: Small parts, keep away from childrenSpecification:12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C) 12V high speed fan with shroud, radiating quickly One meter long PTFE/teflon tubing 4mm OD 2mm ID PC4-01 tube fitting Volcano heating block Outer thread : M6 M7 Nozzle throat outer diameter: 6mm Nozzle throat inner diameter: 4mm Teflon pipe inner


SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
By SIQUK
In Stock
$19.99
$10.99
You Save: 45%

mpn: SK-18-199, ean: 0651354843258,

4.2 out of 5 stars with 71 reviews
SIQUK 3 Pieces (1.5 Meters) PTFE Blue Tubing and PC4-M6 Fittings with PC4-M10 Fittings for 3D Printer 1.75mm Filament Specification Teflon tube Material: PTFE (Poly Tetra Fluoro Ethylene) Outside Diameter: 4mm Inside Diameter: 2mm Density: 2.15-2.20g/cm3 Color: Blue Heat resistance: up to 260℃  Length: 1.5m  PC4-M6 Fittings Inner diameter(blue end): 4mm Thread: M6/3mm Material: copper and plastic Color: golden+blue It supports turn 360。 freely, easy to disassemble.  PC4-M10 Fittings


CCTREE 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10pcs)
CCTREE 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10 CR-10S S4 S5 Makerbot RepRap Prusa i3 (Pack of 10pcs)
By CCTREE
In Stock
$14.99

mpn: CC-Heater-Kit, ean: 0724190092644,

4.9 out of 5 stars with 119 reviews
Product description: Cartridge Heater Description Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention The heating wire inside which is wound onto a ceramic core The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures The solids, liquids, and gases need


BuildTak 3D Printing Build Surface, 6.5'' x 6.5'' Square, Black (Pack of 3)
BuildTak 3D Printing Build Surface, 6.5" x 6.5" Square, Black (Pack of 3)
By BuildTak
In Stock
$19.27
$15.70
You Save: 19%

mpn: BT65X65-3PK, ean: 0099461338722,

4.9 out of 5 stars with 100 reviews
The Buildtak 3D-printing build surface is a 6.5'' x 6.5'' square sheet that adheres to a print bed of a fused-filament 3D printer (sold separately) to help the filament stick during printing, while also enabling clean removal of the printed part afterward. The sheet is compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately), and has a durable construction that allows for multiple uses with either the same or different filament material. The build


Gizmo Dorks PEI Sheet 10'' x 10'' (254mm x 254mm) 1mm Thick 3D Printer Build Surface Ultem 1000, Made in The USA
Gizmo Dorks PEI Sheet 10" x 10" (254mm x 254mm) 1mm Thick 3D Printer Build Surface Ultem 1000, Made in The USA
By Gizmo Dorks
In Stock
$17.95

mpn: GD-POLYPEI-10x10, ean: 0887503180701,

4.1 out of 5 stars with 33 reviews
PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. How to Use: Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second


Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12'' x 12'' (5-Pack)
Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12" x 12" (5-Pack)
By Gizmo Dorks
In Stock
$14.99

mpn: GD-64213-5P, ean: 0887503164213,

4.4 out of 5 stars with 95 reviews
The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance against slippage and edge lighting. Commonly used to bond nameplates, signs, graphic overlays, etc. The 3M 468MP transfer tape is ideal for bonding PEI sheets onto 3D print beds. Well within most 3D printer's print bed temperature range, the 3M 468MP


Stratasys WaveWash 55 Support Cleaning System
Stratasys WaveWash 55 Support Cleaning System
By Stratasys
In Stock
$1,000.00
$955.89
You Save: 4%

mpn: 570-10000,

4.7 out of 5 stars with 86 reviews
Ideal for cleaning of FDM product mock-ups, functional prototypes and end-use parts.


Filabot FOV1 Filabot Original Filament Extruder, Green
Filabot FOV1 Filabot Original Filament Extruder, Green
By Filabot
In Stock
$899.00

mpn: FOV1,

4.9 out of 5 stars with 75 reviews
The Filabot Original filament extruder converts plastic pellets and shavings into 1.75-mm or 3-mm diameter filament for use with fused-filament-fabricator 3D printers. The extruder accepts new or recycled acrylonitrile butadiene styrene (ABS), high impact polystyrene (HIPS), or polylactic acid (PLA) pellets and shavings as well as colorants and additives such as fiber, wood, and conductive materials to create custom filament materials and colors. The extrusion temperature can be set from 40 to


LulzBot TAZ Dual Extruder V3 Tool Head
LulzBot TAZ Dual Extruder V3 Tool Head
By LulzBot
In Stock
$495.00

mpn: KT-CP0127, ean: 0810234030335,

4.9 out of 5 stars with 118 reviews
Take your designs to the next level with the all-new LulzBot TAZ Dual Extruder v3 Tool Head. This tool head was engineered to utilize dedicated support material, including soluble filament, like PVA, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable. The Dual Extruder v3 features a unibody heatsink with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The


Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)
Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)
By Camping Family
In Stock
$28.99
$19.99
You Save: 31%

mpn: Cam3049, ean: 0757290675189,

4.5 out of 5 stars with 126 reviews
MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40WMaterial: Aluminum and Stainless Steel and BrassExtra Nozzles: 7*0.4mm, 1*0.2mm, 1*0.3mm, 1*0.5mmExtra Tube: 10x 30mm Length Extruder 1.75mm Tube Compatible with 1.75mm PLA ABS 3D printer.Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc).. 12V/40W high temperature resistance




Wiiboox 3D Object Scanner, 1.31 Million Pixels, Advanced Laser Scanner
Wiiboox 3D Object Scanner, 1.31 Million Pixels, Advanced Laser Scanner
By Wiiboox
In Stock
$722.93
$704.13
You Save: 3%

mpn: 3d object scanner, ean: 0610738161166,

4.7 out of 5 stars with 9 reviews
Measuring accuracy:≤0.1mmThe maximum measuring range of turntable automatic scanner is 200*200*200mm while for free scanner is 700*700*700mm.The sweep time of turntable automatic scanner is less than 3 minutes while for free scanner is less than 10 seconds (1 side).Dot pitch:0.17mm ~0.2mmAutomatic and manual splicing modes are both accessible.Scanning modes: automatic turntable scanning and free scanningThe scanner outputs files in STL formats for printing directly without the aid of


ELEGOO 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Grey
ELEGOO 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Grey
By ELEGOO
In Stock
$49.99
$22.99
You Save: 54%

mpn: US-EL-3D-005,

4.8 out of 5 stars with 103 reviews
ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin Usage condition : 1) Shake up the bottle before use and avoid direct sunlight and dusty environment 2) Do not drink it and keep it out of the reach of children 3) Please wear a mask and gloves when using to avoid direct skin



Viewing Page 1 of 4

View more products in Additive Manufacturing Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.