Browse Our Catalog

Arch Punches - Page 4 - Super Savings! Save up to 35%


Super Savings! Up to 35% off on Arch Punches at Steel City Robotics, Page 4. Top brands include C.S. Osborne, Meith, Allpax, Value Collection, C. S. Osborne & Co., Oregon Lamination Premium, Energi8_blu, & General Tools. Hurry! Limited time offers. Offers valid only while supplies last.



Arch Punches - 2'' arch punch
Arch Punches - 2" arch punch
By C.S. Osborne
In Stock
$179.14
$170.00
You Save: 5%

mpn: 565-149-2, ean: 0096685010687,

4.4 out of 5 stars with 102 reviews
565-149-2 Features: -Inside taper permits the punchings to clear easily through the barrel. -Punches have fully polished barrel and black enamel handle. -Material: Carbon Steel. -Type: Arch. Product Type: -Punches. Dimensions: Overall Product Weight: -0.19 Pounds.Additional sizes available upon request. Inside taper permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle.


American Made 3/8 inch Radius Round Corner Punch - Heavy Duty 10mm
American Made 3/8 inch Radius Round Corner Punch - Heavy Duty 10mm
By Meith
In Stock
$59.90

mpn: 413-CR, ean: 0033816032880,

4.6 out of 5 stars with 43 reviews
This American Made heavy duty steel 3/8 inch radius corner rounder punch cutter weighs under 10 ounces creating a substantial yet light weight round cornering solution for paper, PVC cards or laminated paper material. This welded design has less moving parts than most cutters in the same class and acts more like a cutter than a punch due to sharper cutting blade, which reduces user effort and cuts up to approx 5/32'' thick (60 mils). Larger side guides make seating more secure too. 3/8 inch is


Allpax AX1850 Dovetail Punch, Number-1
Allpax AX1850 Dovetail Punch, Number-1
By Allpax
In Stock
$36.57

mpn: AX1850, ean: 0690773028044,

4.2 out of 5 stars with 22 reviews
Perfect for fabricating interlocking dove-tail joints when the outside diameter of the gasket is larger than the width of the material to be cut. No pre-measuring, marking or scoring required. Cut 3/4'' to 3'' wide flange gaskets with this 3 piece kit.Padded rubber grip. High-strength steel. Made in USA.


Value Collection - 2-5/32'' Steel Arch Punch - 7-1/4'' OAL
Value Collection - 2-5/32" Steel Arch Punch - 7-1/4" OAL
By Value Collection
In Stock
$179.95

mpn: 60058302, ean: 0798131909360,

4.0 out of 5 stars with 142 reviews
Punch Type ArchPunch Size (Inch) 2-5/32. Overall Length Range 7'' - 9.9''. Material Steel. Overall Length (Inch) 7-1/4.


C.S.Osborne 9/16'' Arch Punch with Fully Tempered Cutting Edge
C.S.Osborne 9/16" Arch Punch with Fully Tempered Cutting Edge
By C.S. Osborne
In Stock
$39.89

mpn: 1022,

4.2 out of 5 stars with 92 reviews
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16'' to 2-1/4'' diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use


Value Collection - 1-3/8'' Steel Arch Punch - 5-5/8'' OAL (5 Pack)
Value Collection - 1-3/8" Steel Arch Punch - 5-5/8" OAL (5 Pack)
By Value Collection
In Stock
$339.95

mpn: 60058195, ean: 0798131899494,

4.3 out of 5 stars with 79 reviews
Punch Type ArchPunch Size (Inch) 1-3/8. Overall Length Range 4'' - 6.9''. Material Steel. Overall Length (Inch) 5-5/8.


C.S.Osborne 15mm Arch Punch with Fully Tempered Cutting Edge
C.S.Osborne 15mm Arch Punch with Fully Tempered Cutting Edge
By C.S. Osborne
In Stock
$37.61

mpn: 1230,

4.2 out of 5 stars with 87 reviews
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16'' to 2-1/4'' diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use


C.S. OSBORNE 149-6-13/16 ARCH PUNCH
C.S. OSBORNE 149-6-13/16 ARCH PUNCH
By C. S. Osborne & Co.
In Stock
$626.94
$616.50
You Save: 2%

mpn: 1996, ean: 0096685011967,

4.7 out of 5 stars with 80 reviews
C. S. Osborne & Co. 149-6-13/16 ARCH PUNCH-Package quantity: 1. MADE IN USA to last.Quality tools from C.S.Osborne. Made in the USA, built to last.. MADE IN USA.


Value Collection - 1-5/16'' Steel Arch Punch - 5-9/16'' OAL (7 Pack)
Value Collection - 1-5/16" Steel Arch Punch - 5-9/16" OAL (7 Pack)
By Value Collection
In Stock
$449.95

mpn: 60058187, ean: 0798131903719,

4.1 out of 5 stars with 61 reviews
Punch Type ArchPunch Size (Inch) 1-5/16. Overall Length Range 4'' - 6.9''. Material Steel. Overall Length (Inch) 5-9/16.


Arch Punches - 1 3/4'' arch punch
Arch Punches - 1 3/4" arch punch
By C.S. Osborne
In Stock
$84.09

mpn: 565-149-1-3/4, ean: 0096685010601,

4.9 out of 5 stars with 18 reviews
565-149-1-3/4 Features: -Inside taper permits the punchings to clear easily through the barrel. -Punches have fully polished barrel and black enamel handle. -Material: Carbon Steel. -Type: Arch. Product Type: -Punches. Dimensions: Overall Product Weight: -0.75 Pounds.Additional sizes available upon request. Inside taper permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle.


Deluxe 5mm Round Corner Punch Cutter (approx 7/32-inch Radius)
Deluxe 5mm Round Corner Punch Cutter (approx 7/32-inch Radius)
By Oregon Lamination Premium
In Stock
$49.95

mpn: C-006-5mm, ean: 0033816032651,

4.7 out of 5 stars with 125 reviews
This heavy duty hand held corner rounding tool with 5mm radius weighs under 14 ounces & cuts up to approx 5/64'' thick (75 mils) paper, PVC cards or laminated paper material. 5mm radius is approximately 7/32 of an inch. Has large steel cutting blade and extra wide side guides to make seating your sheet simple and efficient. This radius is common on the corners of many playing cards. This tool is built to last a long time.Extra Wide Side Guides make Seating your Item Simple and Efficient. Has


DIY Pick Punch Make Guitar Pick Maker Plastic Card Cutter Tool Black Machine NEW
DIY Pick Punch Make Guitar Pick Maker Plastic Card Cutter Tool Black Machine NEW
By Energi8_blu
In Stock
$31.34

ean: 0696252141334,

4.5 out of 5 stars with 65 reviews
Make your own personalized guitar picks (plectrums) from plastic and other material up to 1.0mm thick! Make picks from ABS and PVC plastics, Celluloid and Derlin. In addition to plastic blanks, you can make picks from old credit cards, hotel key cards, gift cards, and any other plastic cards up to 1.9mm thick.To operate, simply place cutter on a flat surface, slide material in, and press down to cut pick. Cuts plastic up to 1.0mm thick. Bottom of cutter is plastic ~ it won't scuff or mar table


General Tools & Instruments 1271ST Arch Punch Set (7 Piece)
General Tools & Instruments 1271ST Arch Punch Set (7 Piece)
By General Tools
In Stock
$99.98
$64.73
You Save: 35%

mpn: 1271ST, ean: 0038728438492,

4.8 out of 5 stars with 150 reviews
Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100.


C.S.Osborne 18mm Arch Punch with Fully Tempered Cutting Edge
C.S.Osborne 18mm Arch Punch with Fully Tempered Cutting Edge
By C.S. Osborne
In Stock
$42.17

mpn: 1236, ean: 5060517400576,

4.6 out of 5 stars with 129 reviews
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16'' to 2-1/4'' diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use


C.S.Osborne 3/4'' Arch Punch with Fully Tempered Cutting Edge
C.S.Osborne 3/4" Arch Punch with Fully Tempered Cutting Edge
By C.S. Osborne
In Stock
$31.00

mpn: 1028, ean: 0099668501028,

4.5 out of 5 stars with 135 reviews
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16'' to 2-1/4'' diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use


Value Collection - 1-1/2'' Steel Arch Punch - 5-5/8'' OAL (4 Pack)
Value Collection - 1-1/2" Steel Arch Punch - 5-5/8" OAL (4 Pack)
By Value Collection
In Stock
$359.95

mpn: 60058211, ean: 0798131894499,

4.4 out of 5 stars with 76 reviews
Punch Type ArchPunch Size (Inch) 1-1/2. Overall Length Range 4'' - 6.9''. Material Steel. Overall Length (Inch) 5-5/8.


General Tools 1271E Arch Punch, 1/2-Inches
General Tools 1271E Arch Punch, 1/2-Inches
By General Tools
In Stock
$12.99
$10.60
You Save: 18%

mpn: 1271E, ean: 0038728438041,

4.0 out of 5 stars with 33 reviews
The General Tools and Instruments 1271E Arch Punch is the ideal punch tool for punching a 1/2 inch hole. The punch works on leather, rubber, canvas, plastic, sheet metal, gasket material, cardboard and softer metals. The internal punch features an inside taper for clearance. The punches are heat treated forged steel, ensuring long lasting performance. Because of this heat treatment, the cutting edge will stay sharper longer.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT.


SEPTLS565149516 - C.S. Osborne Arch Punches - 149-5/16
SEPTLS565149516 - C.S. Osborne Arch Punches - 149-5/16
By C.S. Osborne
In Stock
$24.00
$15.65
You Save: 35%

mpn: 565-149-5/16, ean: 0096685010144,

4.2 out of 5 stars with 127 reviews
Inside taper permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. Additional sizes available upon requestCutter Diam - 5/16 in. Material - Carbon Steel. Tip Size - 5/16 in. Type - Arch.


Arch Punches - 1 3/16 arch punch
Arch Punches - 1 3/16 arch punch
By C.S. Osborne
In Stock
$24.00

mpn: 565-149-1-3/16, ean: 0096685010427,

4.4 out of 5 stars with 10 reviews
565-149-1-3/16 Features: -Inside taper permits the punchings to clear easily through the barrel. -Punches have fully polished barrel and black enamel handle. -Material: Carbon Steel. -Type: Arch. Product Type: -Punches. Dimensions: Overall Product Weight: -0.19 Pounds.1-3/16'' Arch Punch.


C.S. OSBORNE 149-6-1/8 ARCH PUNCH
C.S. OSBORNE 149-6-1/8 ARCH PUNCH
By C. S. Osborne & Co.
In Stock
$596.90
$586.50
You Save: 2%

mpn: C.S. OSBORNE 149-6-1/8 ARCH PUNCH, ean: 0096685011851,

4.9 out of 5 stars with 130 reviews
C. S. Osborne & Co. 149-6-1/8 ARCH PUNCH-Package quantity: 1. MADE IN USA to last.Quality tools from C.S.Osborne. Made in the USA, built to last.. MADE IN USA.



Viewing Page 4 of 5

View more products in Punches.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.