Browse Our Catalog

Center Punches - Super Savings! Save up to 38%


Super Savings! Up to 38% off on Center Punches at Steel City Robotics. Top brands include Bullseye Tools, Tebery, Starrett, Greenlee, Austin Swenson, Fowler, General Tools, Stanley, MulWark, Forge Industrial, HORUSDY, TEKTON, Mayhew Tools, AIBER, U.J. Ramelson, & Global Tools. Hurry! Limited time offers. Offers valid only while supplies last.



CENTER FINDER
CENTER FINDER
By Bullseye Tools
In Stock
$17.95

mpn: CF 100, ean: 0744904604901,

4.2 out of 5 stars with 79 reviews
Simply place the Bullseye center punch tool over the end of a round or square rod and tap with a hammer to mark the exact center. Fits any standard rod (1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'', 7/8''and 1''). No need to scribe the rod. The hardened steel punch is captive within the rigid polymer housing and will not fall out. Especially useful for small diameters that are impossible to mark accurately with other center finders. Comes in reusable retail box with instruction card. MADE


Tebery 5'' Automatic Center Hole Punch Adjustable Impact, Silver and Gold (2 Pack)
Tebery 5" Automatic Center Hole Punch Adjustable Impact, Silver and Gold (2 Pack)
By Tebery
In Stock
$10.99

mpn: 43237-2, ean: 0680147284749,

4.8 out of 5 stars with 104 reviews
To prevent drills and screws from wandering in metal, wood, or plastic, use the Automatic Center Punch to mark a dimpled starting point. Quick and easy to use, it delivers an automatic spring-driven strike when it's pressed against a surface. An adjustable cap allows you to regulate the striking force. The premium brass body has a deeply knurled nonslip surface for sure handling and control.Marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering.


Starrett 816A Prick Punch, 4'' Length, 5/64'' Tapered Point Diameter
Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter
By Starrett
In Stock
$10.84
$10.12
You Save: 7%

mpn: 816A, ean: 0049659530438,

4.3 out of 5 stars with 8 reviews
The Starrett 816A prick punch is 4'' long and has a 5/64'' diameter tapered point. The point is sharp for precise placement of a drill bit. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shank is round and knurled for grip.Center and prick punches are used to make a dimple mark in materials to guide a drill bit. Manual punch hand tools have a metal shank and a shaped or flat point that is typically tapped with a ball-peen hammer to make a


Greenlee 2984AV 4'' Conduit Punch-2PK
Greenlee 2984AV 4" Conduit Punch-2PK
By Greenlee
In Stock
$781.53

mpn: 2984AV-2PK, ean: 0642008668310,

4.4 out of 5 stars with 56 reviews
The Greenlee company offers you a premium collection of tools and accessories. This Greenlee 4'' Conduit Punch is made for Standard Round Knockout Punch Unit.Replacement partCan be used on mild steel up to 10 gauge.


Coin Ring Center Punch. 1.5'' Kit. With 5/8'' and 1/2'' Punches.
Coin Ring Center Punch. 1.5" Kit. With 5/8" and 1/2" Punches.
By Austin Swenson
In Stock
$145.00

mpn: 1, ean: 7284611794302,

4.6 out of 5 stars with 11 reviews
Hi there, This is a new coin ring center punch set that I'm offering. It comes TWO PUNCHES sized at 5/8'' and 1/2'' punch with TWO SPACERS for Quarter and 50 Cent. The punches have a 5/8'' shank. They are hollow ground and have a 5 degree relief angle. What sets my kits apart is the interchangeable design, which allows for multiple punch sizes with the same kit, saves lots of money, precision machine work and hardened punches. The 5/8'' punch is good for the Morgan Dollar which is what the body


Fowler 52-500-012 Steel Optical Center Punch, 4'' Length, 3X Magnification
Fowler 52-500-012 Steel Optical Center Punch, 4" Length, 3X Magnification
By Fowler
In Stock
$25.14
$15.56
You Save: 38%

mpn: 52-500-012-0, ean: 0646795117723,

4.7 out of 5 stars with 91 reviews
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27'' and is accurate to + or - 0.00006''. Resolution is 0.00001'' and the measuring depth is 3.15''. The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal


General Tools 79 Steel Automatic Center Punch
General Tools 79 Steel Automatic Center Punch
By General Tools
In Stock
$25.99
$17.39
You Save: 33%

mpn: 79, ean: 0080050277171,

4.7 out of 5 stars with 20 reviews
General Tools Solid Point Steel Automatic Center Punch is made to withstand long lasting use and provide professional results. Conveniently includes one replaceable tip. Features a simple one hand operation for greater comfort and a black oxide finish eliminating rust for optimal durability. Measures 5'' body with a 1/2'' diameter.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world


Stanley 16-226 6 Piece Punch Kit
Stanley 16-226 6 Piece Punch Kit
By Stanley
In Stock
$9.99

mpn: 16-226, ean: 7336117939692,

4.2 out of 5 stars with 11 reviews
Features. Made from one piece forged chrome vanadium steel that is hardened. Quenched and tempered for long life. Powder coat finish for increased visibility. 6 pieces. Size - 6 in. long.Accessible packaging enables customer to easily evaluate products in store. Limited Lifetime Warranty. Stanley - Black & Decker.


MulWark 5'' Spring-Loaded Automatic Steel Center Hole Punch Marker Scriber For Wood, Metal, Plastic, Car Window Puncher Breaker Tool-With Palm Cushion Cap, Adjustable Impact-A Replacement Tip Included
MulWark 5" Spring-Loaded Automatic Steel Center Hole Punch Marker Scriber For Wood, Metal, Plastic, Car Window Puncher Breaker Tool-With Palm Cushion Cap, Adjustable Impact-A Replacement Tip Included
By MulWark
In Stock
$13.99
$10.99
You Save: 21%

mpn: MLK-53745, ean: 0736649537453,

4.2 out of 5 stars with 115 reviews
The MulWark 5'' Automatic Centering Punch has a built-in spring tension mechanism that automatically strikes a sharp blow when downward pressure is applied, without the use of a hammer, leaving one hand free to steady the work. The all-steel punch is adjustable as to the amount of force per blow to control the depth and size of the mark. This tool is ideal for punching, marking, scribing, and staking most metals and woods to start drill, nail or screw holes. Made of hardened tempered steel and


Automatic Center Punch - 5 inch Brass Spring Loaded Center Hole Punch with Adjustable Tension, Hand Tool for Metal or Wood - Pack of 2
Automatic Center Punch - 5 inch Brass Spring Loaded Center Hole Punch with Adjustable Tension, Hand Tool for Metal or Wood - Pack of 2
By Forge Industrial
In Stock
$11.98

ean: 0738246420299,

4.8 out of 5 stars with 136 reviews
AMAZING TOOL THAT MAKES STRIKING A CENTER HOLE EASY! This Forge Industrial 2 Pack Automatic Hand Punch Tool offers a spring loaded mechanism that actually works and makes a solid mark in wood, metal, steel, aluminum, brass, copper and more. Don't let your drill walk again! Always give your drill a starting point and makes it easier for you so it doesn't slip in tight spots. Our automatic center punch is made of a well machined brass body and has a deeply knurled surface which means that it will


Starrett 816B Prick Punch, 4'' Length, 1/8'' Tapered Point Diameter
Starrett 816B Prick Punch, 4" Length, 1/8" Tapered Point Diameter
By Starrett
In Stock
$10.00

mpn: 816B, ean: 0049659530445,

4.8 out of 5 stars with 65 reviews
The Starrett 816B prick punch is 4'' long and has a 1/8'' diameter tapered point. The point is sharp for precise placement of a drill bit. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shank is round and knurled for grip.Center and prick punches are used to make a dimple mark in materials to guide a drill bit. Manual punch hand tools have a metal shank and a shaped or flat point that is typically tapped with a ball-peen hammer to make a


HORUSDY 2PC Automatic Centre Punch, Adjustable Spring Loaded Metal Drill Tool Glod (large)155mm/6.1'', (Small)130mm/5.1''
HORUSDY 2PC Automatic Centre Punch, Adjustable Spring Loaded Metal Drill Tool Glod (large)155mm/6.1", (Small)130mm/5.1"
By HORUSDY
In Stock
$13.99

mpn: 97285,

4.7 out of 5 stars with 24 reviews
1111Features adjustable spring loaded design for variable impact strength and hardened tip for long service life. One handed operation, simply adjust to desired spring tension, press firmly against work piece for automatic centre punch. One-handed operation makes accurate marks without the need for a hammer. Manufactured in industrial black and chrome finish with knurled body for extra grip. Can be used for vehicle emergencies as a side window rescue glass breaking tool.


TEKTON 66085 1/2-Inch Center Punch
TEKTON 66085 1/2-Inch Center Punch
By TEKTON
In Stock
$13.34
$13.05
You Save: 2%

mpn: 66085, ean: 0020209660850,

4.0 out of 5 stars with 84 reviews
The sharp point of the TEKTON 1/2 inch Center Punch marks workpiece with a dimple, creating an exact starting spot for drill that prevents it from wandering. It works on just about any material softer than the point itself, including cast iron, mild steel, brass, bronze, copper, aluminum, wood, and even plastics and polymers. The tapered shaft and sharp point are precisely machined to meet exacting size tolerances, ensuring they are straight and true. Made from premium, high carbon steel, each


Mayhew Select 89082 Punch Set, 3-Piece
Mayhew Select 89082 Punch Set, 3-Piece
By Mayhew Tools
In Stock
$15.77
$10.98
You Save: 30%

mpn: 89082_45, ean: 0077344032332,

4.7 out of 5 stars with 76 reviews
The Mayhew 89082 3 piece punch set, carded includes: 24008 – 7/16'' center punch 1/4'' pt 43502 – 7/32'' x 5'' Pri ck punch 74001 – 5/16'' REG EC center punch24008 7/16-inch center punch 1/4-inch pt. 43502 7/32-inch by 5-Inch pri ck punch. 74001 5/16-inch REG EC center punch.


Greenlee 710 Metal stud punch 1-11/32in 710
Greenlee 710 Metal stud punch 1-11/32in 710
By Greenlee
In Stock
$544.92

mpn: 710,

4.2 out of 5 stars with 98 reviews
Metal stud punch 1-11/32in.


Woodworking Drilling Locator Tool Kit Aluminum Alloy Pocket Hole Jig Kit System
Woodworking Drilling Locator Tool Kit Aluminum Alloy Pocket Hole Jig Kit System
By AIBER
In Stock
$34.99

mpn: HK2016367,

4.0 out of 5 stars with 136 reviews
Suitable For:Wood Drilling Packing Included: 1 x Punch locator(With threaded rod 8/10mm and 15mm Eccentric drill bushing) 1 x 8/10/15mm drill bit (with stop ring) 1 x wrench as Half moon 1 x Allen wrench 1 x Tool BoxMaterial: Aluminium Alloy(6061). Surface Treatment: Anodized. Abrasion resistance, long service life. Scale: Laser engraving (non-screen printing, prolonged use of the mark will not wear). Punching a 8mm thread rod hole and a 15mm eccentric wheel hole. Adjusting range of


SET OF 2 OVAL EYE PUNCHES
SET OF 2 OVAL EYE PUNCHES
By U.J. Ramelson
In Stock
$21.95
4.8 out of 5 stars with 66 reviews
Eye punches are the easy way to make perfect eyes on all of your carvings. After you have carved the facial features, simply position the proper size eye punch and rotate while pushing on the handle. Overall length is approximately 6''..


New Pen Type Adjustable force Automatic Centre center Punch Tool
New Pen Type Adjustable force Automatic Centre center Punch Tool
By Global Tools
In Stock
$12.95

mpn: PCP-5,

4.1 out of 5 stars with 52 reviews
For indenting the work-piece prior to drilling without the need for hammering. Delivers a punch when hand pressure is applied to knurled head. One handed operation. Brand New Eclipse base design Automatic centre punch Adjustable force upto 13 kgs simply by the knurled Cap on the head, Pen Type Holder Hardened & Ground Alloy Steel Pin of Hardness 60 +/-2 HRC Knurled body for a firm grip to avoid any slippage Length: 120 mm Qnty: 1 Pc.New Pen Type Adjustable force Automatic Centre center Punch


Starrett 117E Center Punch With Round Shank, 5'' Length, 1/4'' Tapered Point Diameter
Starrett 117E Center Punch With Round Shank, 5" Length, 1/4" Tapered Point Diameter
By Starrett
In Stock
$10.15
$9.35
You Save: 8%

mpn: 117E, ean: 0049659504873,

4.8 out of 5 stars with 147 reviews
The Starrett 117E center punch with round shank is 5'' long and has a 1/4'' (6.5 mm) diameter tapered point. The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Center punches make small dimple marks in a workpiece to help guide a drill bit. Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. Automatic center punches have an internal spring


General Tools 89 Stainless Steel Automatic Center Punch with Adjustable Stroke
General Tools 89 Stainless Steel Automatic Center Punch with Adjustable Stroke
By General Tools
In Stock
$11.22

mpn: 89, ean: 0069060365764,

4.4 out of 5 stars with 124 reviews
The stainless steel body center punch is a precise means of punching center holes for drilling in layout work allowing single hand operation which prevents drill bits from traveling and the durable stainless steel body will not rust. Can be used for vehicle emergencies as a side window rescue glass breaking tool.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range



Viewing Page 1 of 4

View more products in Punches.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.