Browse Our Catalog

Center Punches - Page 2 - Blowout Sale! Save up to 70%


Blowout Sale! Up to 70% off on Center Punches at Steel City Robotics, Page 2. Top brands include Eclipse, Band-It, Consumer Pyro, Xilko, Starrett, Hitachi, Mayhew Tools, Spring Tools, Taytools, Rockler, C.S. Osborne, Rennsteig, Austin Swenson, & Promax. Hurry! Limited time offers. Offers valid only while supplies last.



Eclipse 65-171R Automatic Center Punch, Tool Steel, 4'' Length Blade
Eclipse 65-171R Automatic Center Punch, Tool Steel, 4" Length Blade
By Eclipse
In Stock
$16.69
$16.64

mpn: 65-171R, ean: 5012095431459,

4.9 out of 5 stars with 66 reviews
Delivers a punch when hand pressure is applied to the knurled head. This tool is design to be a one handed operation (hammer should not be used). Depth of impression can be adjusted by turning the knurled head.One handed operation (hammer should not be used). 4-11/16'' overall length, 30-5 operating pressure range. Depth of impression can be adjusted by turning the knurled head. Delivers a punch when hand pressure is applied to the knurled head. Works on metal, plastic, wood and other


BAND-IT CP1099 5/8'' Wide x 0.025'' Thick 2-1/2'' Diameter, Galvanized Carbon Steel Center Punch Clamp (50 Per Box) (4-(Pack))
BAND-IT CP1099 5/8" Wide x 0.025" Thick 2-1/2" Diameter, Galvanized Carbon Steel Center Punch Clamp (50 Per Box) (4-(Pack))
By Band-It
In Stock
$320.32
4.9 out of 5 stars with 25 reviews
Galvanized carbon steel band offers medium strength with medium corrosion resistance to mild chemicals and occasional fresh water. Center Punch clamps use a punch style clamp for economy and ease of installation. For general plant maintenance or emergency field repairs. BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies. Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or


Non Sparking Fireworks Saftey Brass Awl - Pyro Poke for Shrouded Ematch
Non Sparking Fireworks Saftey Brass Awl - Pyro Poke for Shrouded Ematch
By Consumer Pyro
In Stock
$18.95

mpn: cp-001, ean: 0864122000429,

4.4 out of 5 stars with 149 reviews
The 1/4 inch Consumer Pyro Poke brass fireworks safety awl is used to make a hole in a firework lift charge so that a shrouded (plastic cover) ematch or Firewire Initiator can be inserted into the lift charge. This awl is made from Aluminum Bronze and has a 3.5 inch nonsparking shaft with a sharp tip. The orange and black rubber handle fits in the palm of your hand better than other awls and feels comfortable to use. Aluminum bronze tools are high quality, non sparking, non magnetic, and


Xilko 3Pcs High-Speed Steel Step Drill Bit Set with Automatic Center Punch, Titanium Coated Metal Hole Cutter 1/4 Hex Shank Drive Quick Change 4-12/4-20/4-32mm
Xilko 3Pcs High-Speed Steel Step Drill Bit Set with Automatic Center Punch, Titanium Coated Metal Hole Cutter 1/4 Hex Shank Drive Quick Change 4-12/4-20/4-32mm
By Xilko
In Stock
$73.30
$21.99
You Save: 70%

mpn: USXILKO_0232,

4.8 out of 5 stars with 38 reviews
Features: The drill uses high-speed steel titanium alloy for titanium coating surface treatment, suitable for workpieces with a hardness of less than 25 degrees. Hexagonal shank titanium alloy drill bit is very suitable for punching various materials such as steel, brass, wood, plastic, etc. It can also be widely used in thin iron plate, aluminum plate, insulating plate, PVC plate and other thickness less than 5mm. Automatic center stamping, by adjusting the cap, provides spring impact when


Starrett 18AA Automatic Center Punch With Adjustable Stroke, 4'' Length, 7/16'' Diameter
Starrett 18AA Automatic Center Punch With Adjustable Stroke, 4" Length, 7/16" Diameter
By Starrett
In Stock
$35.00

mpn: 18AA, ean: 0049659501193,

4.4 out of 5 stars with 40 reviews
The Starrett 18AA automatic center punch with adjustable stroke is 4'' long with a 7/16'' (11 mm) diameter for creating a starter dimple without the need for a hammer. The punch has an adjustable stroke, which can be set by turning the knurled cap and is regulated by spring tension for uniform dimple size at every setting. The punch is made from hardened and tempered steel components that provide wear resistance and strength. It has a round handle that is knurled for grip. The point can be


Hitachi 998030 Punch for Hitachi CN16 and CN16SA Nibblers
Hitachi 998030 Punch for Hitachi CN16 and CN16SA Nibblers
By Hitachi
In Stock
$14.90

mpn: 998030, ean: 7466655989429,

4.6 out of 5 stars with 97 reviews
Hitachi 998030 Punch for Hitachi CN16 and CN16SA NibblersPunches in a downward direction. Minimizes scattering of cut chips on the work piece. Fits with Hitachi Nibbler models CN16 and CN16SA. Made of high quality materials that will not break or chip. Comes with a 30-day limited warranty. Well-built with a simple design. Compatible with Hitachi CN16 and CN16SA Nibblers. Designed for home improvement and nibbling projects. Quick setup is intuitive and easy to use.


Mayhew 62078 12-Piece Hardened Steel Pin Punch Set
Mayhew 62078 12-Piece Hardened Steel Pin Punch Set
By Mayhew Tools
In Stock
$89.99
$49.99
You Save: 44%

mpn: 62078, ean: 0045256620787,

4.2 out of 5 stars with 64 reviews
Pin punches are used for driving out already loosened pins and keys. Available in many lengths and sizes to fit any application. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for OEMs and professional mechanics throughout the


Spring Tools 28R45-1 Hammerless Single Ended High Speed Steel Center Punch
Spring Tools 28R45-1 Hammerless Single Ended High Speed Steel Center Punch
By Spring Tools
SKU: #208139
In Stock
$12.71

sku: 208139, mpn: 28R45-1, ean: 0761751000212,

4.6 out of 5 stars with 12 reviews
Force = Mass x Acceleration This has been a simple yet very powerful concept since Isaac Newton’s time. At Spring Tools, we create tools based on this principal. Our tools are about the size of a ball point pen yet have over 3500 lbs of striking impact and use no other outside force such as a hammer. Simple is good: The Spring Tool concept is designed to re-direct energy in a very concentrated area between (2) very strong carbon steel pieces that are permanently connected by a spring made out


Spring Tools 38R04-1 Hammerless Self Centering Punch
Spring Tools 38R04-1 Hammerless Self Centering Punch
By Spring Tools
SKU: #2495-0073
In Stock
$11.95
$10.78
You Save: 10%

sku: 2495-0073, mpn: 38R04-1, ean: 0761751000021,

4.5 out of 5 stars with 50 reviews
Force = mass x acceleration this has been a simple yet very powerful concept since isaac newton’s time. At Spring Tools, we create tools based on this principal. Our tools are about the size of a ball point pen yet have over 3500 lbs of striking impact and use No other outside force such as a hammer. Simple is good the spring tool concept is designed to re-direct energy in a very concentrated area between (2) very strong carbon steel pieces that are permanently connected by a spring made out


Japanese Style Max Size Awl Hardwood Handle Hardened High Carbon Steel Blade Very Sharp Point 5 1/2” Long .990” Diameter JAMAX
Japanese Style Max Size Awl Hardwood Handle Hardened High Carbon Steel Blade Very Sharp Point 5 1/2” Long .990” Diameter JAMAX
By Taytools
In Stock
$13.99

mpn: JA-MAX, ean: 0791617732377,

4.4 out of 5 stars with 147 reviews
This larger max size awl can be easily cupped in the hand allowing more control for precise work. It is perfect for marking precision points for drilling or starting screws. It can also be used to mark a line against a rule or pierce small holes in thinner material. Overall length is 5.5'' and is .900'' in diameter. The blade is made from hardened high carbon tool steel and ground to a very fine point. This awl is a pleasure to hold and use.This larger size can be comfortably cupped in the hand


Center Punch and Carbide Scribe Marking Set
Center Punch and Carbide Scribe Marking Set
By Rockler
In Stock
$17.99

mpn: TAKL130104,

4.0 out of 5 stars with 137 reviews
Two-piece marking tool set works great with our templates! Spring-actuated center punch with power adjustable head indents the wood for perfect alignment - get perfectly straight knobs and pulls every time! Carbide-tipped scribe is ideal for marking out joinery on soft and hardwoods. Carbide-tipped scribe will also scribe into steel and ceramics. Metal body..


Mayhew 60007 Center Punch Kit, 7-Piece
Mayhew 60007 Center Punch Kit, 7-Piece
By Mayhew Tools
In Stock
$31.30
$28.29
You Save: 10%

mpn: 60007, ean: 0045256600079,

4.8 out of 5 stars with 32 reviews
The Mayhew 60007 Center Punch Kit, 7-Piece, includes: 24000 1/4-Inch Black Oxide Center Punch, 24001 5/16-Inch Black Oxide Center Punch, 24002 3/8-Inch Black Oxide Center Punch, 24005 1/4-Inch Black Oxide Center Punch 1/16 Pt, 24006 1/4-Inch Black Oxide Center Punch 5/64 Pt, 24007 5/16-Inch Black Oxide Center Punch 1/8 Pt, and 24008 7/16-Inch Black Oxide Center Punch 1/4 Pt. Set comes in a pouch. And while our company has grown to meet the needs of the professional market, as well as those of


Starrett S264WB Set of 7 Center Punches in Round Plastic Box
Starrett S264WB Set of 7 Center Punches in Round Plastic Box
By Starrett
In Stock
$74.00
$73.99

mpn: S264WB, ean: 0049659512854,

4.9 out of 5 stars with 21 reviews
The Starrett S264WB set includes seven center punches with a square shank, and 1/16'', 5/64'', 3/32'', 1/8'', 5/32'', 3/16'', and 1/4'' diameter tapered points. The set comes with a round red plastic case for storage. Each punch has a tempered steel shank for strength and a hardened steel point for wear resistance. The shanks are knurled for grip and have a square shape to prevent them from rolling when placed on a work surface. Center punches make small dimple marks in a workpiece to help


Punch Sets - 9 piece self centering punch set
Punch Sets - 9 piece self centering punch set
By C.S. Osborne
In Stock
$83.99
$67.25
You Save: 20%

mpn: 565-K-156, ean: 0096685018706,

4.3 out of 5 stars with 53 reviews
565-K-156 Features: -Self centering punch set. -Handy and versatile kit contains threaded handle with self-centering pointed plunger. -Threaded handle will acommodate nine interchangeable threaded cutting tubes. -Punches in this set will cleanly cut leather, rubber, paper, plastics and other soft materials. Product Type: -Punches. Generic Dimensions: -Tube sizes: 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'', 7/8'', 1''. Dimensions: Overall Product Weight: -3 Pounds.Type - Punch Set. Cutter


Rennsteig  5-1/4'' Automatic Adjustable Center Punch, RN430231
Rennsteig 5-1/4" Automatic Adjustable Center Punch, RN430231
By Rennsteig
In Stock
$50.82

mpn: RN430231, ean: 0043099453128,

4.9 out of 5 stars with 27 reviews
RENNSTEIG 5.7'' automatic center punch. Made in Germany by RENNSTEIG, a premier European manufacturer of professional, high quality screw extractors, punches, cold chisels, cutting, crimping and stripping tools.Made of machine steel with spring loaded self-striking mechanism. Impact strength is adjusted by roation of the knurl. Replaceable hardened pin w/ two-component hand guard. Nickel plated finish. Made in Germany.


1.5" O.D. Coin Ring Cneter Punch Spacers (Quarter)
By Austin Swenson
In Stock
$10.00

mpn: 1.5ODSP, ean: 7285843468184,

4.9 out of 5 stars with 41 reviews
Hi There This listing is for a 1.5'' O.D. Spacer of your choice. These spacers are made from strong 6061 aluminum and are only guaranteed to fit in the 1.5'' Coin Ring Center Punch Kits I have to offer. These spacers can be made in a custom coin size. *** For Custom Orders please select Other (CUSTOM) in the drop box and send a message to the seller with the exact diameter size of the coin you wish to have a spacer for. *** Thank You!!!.


BAND-IT T30069 Center Punch Tool, Includes Adapter For 3/8'' Wide Center Punch Clamps, Hand Tool To Be Used With 5/8'' Wide Center Punch Style Clamps
BAND-IT T30069 Center Punch Tool, Includes Adapter For 3/8" Wide Center Punch Clamps, Hand Tool To Be Used With 5/8" Wide Center Punch Style Clamps
By Band-It
In Stock
$207.01
$199.62
You Save: 4%

mpn: T30069,

4.3 out of 5 stars with 109 reviews
The BAND-IT T30069 center punch tool has a tension handle and a floating punch head and can be used on a workbench to tighten and secure a BAND-IT center punch clamp around a fitting. The tool accepts BAND-IT center punch clamps that are 5/8'' wide and between 1'' and 8'' in diameter. The tool comes with an adapter that enables it to accept clamps that are 3/8'' wide and 13/16'' or 1-3/8'' in diameter. The tension handle can be pushed downward with short strokes to tighten the clamp. The


Promax MT79051 Center Finder
Promax MT79051 Center Finder
By Promax
In Stock
$10.93
$10.81
You Save: 1%

mpn: EDN-PNE-554806, ean: 0619922790519,

4.5 out of 5 stars with 132 reviews
Promax center finder, finds the center in seconds. No moving parts, no calculations and high precision. Gives the center of round, squarehexagon and octagon stock. Great for determining the center in stock for turning in lathe or other purposes.No moving parts, no calculations. High impact plastic material. Up to 8-Inch circle, square and octogon stock. Up to 5-3/4-Inch hexagon stock. A simple 2 step process finds your center.


Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4'' Length, 11/16'' Diameter
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
By Starrett
In Stock
$47.00

mpn: 18C, ean: 0049659567571,

4.1 out of 5 stars with 121 reviews
The Starrett 18C heavy-duty automatic center punch with adjustable stroke is 5-1/4'' long with a 11/16'' (17 mm) diameter for creating a starter dimple without the need for a hammer. This heavy-duty model is capable of striking a heavier blow than the Starrett 18A and 18AA automatic center punches. It has an adjustable stroke, which can be set by turning the knurled cap and is regulated by spring tension for uniform dimple size at every setting. The punch is made from hardened and tempered


Starrett S117PC Centre Punch Set 5pc
Starrett S117PC Centre Punch Set 5pc
By Starrett
In Stock
$83.90

mpn: 1, ean: 5055413671854,

4.6 out of 5 stars with 140 reviews
Hardened and tempered centre punch with a knurled finger grip.



Viewing Page 2 of 4

View more products in Punches.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.