Conductive Adhesives - Page 2 - On Sale Now! Save up to 7%


On Sale! Up to 7% off on Conductive Adhesives at Steel City Robotics, Page 2. Top brands include Atom Adhesives, Epoxy International, CR Laurence, Halnziye, PERMABOND, 2-P10KIT, MG Chemicals, Parker Chomerics, & ConductiveX. Hurry! Limited time offers. Offers valid only while supplies last.



Backglass Defroster Defogger Power Tab Antenna Rapair Kit Conductive Epoxy, AA-DUCT 902, 2.5gm Pouch
Backglass Defroster Defogger Power Tab Antenna Rapair Kit Conductive Epoxy, AA-DUCT 902, 2.5gm Pouch
By Atom Adhesives
In Stock
$45.98

mpn: AA-DUCT 902-2 Glass Repair,

4.6 out of 5 stars with 33 reviews
This Atom Adhesives' Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes: two-part Conductive Tab Repair EpoxySpec. Gravity 2.79 g/cc Cured Viscosity Paste ot Life 30 min solids contents, % 100. Mechanical Properties Hardness, Shore D 83 Adhesive. Shrinkage linear in/in 0.003, Lap shear strength,psi 9400 Vol Resistivity ohm cm equal 0.0001. cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C. Mix Ratio, parts by


Silver-Bond G2 Low Cost, Silver Coated Glass Sphere, Electrically Conductive, Epoxy Adhesive
Silver-Bond G2 Low Cost, Silver Coated Glass Sphere, Electrically Conductive, Epoxy Adhesive
By Epoxy International
In Stock
$549.99

mpn: Silver-Bond G2-500,

4.2 out of 5 stars with 102 reviews
Benefits: High strengthPerfect bondEMI & RFI shieldingWave guides Substrates: Excellent choice for the Integrated Circuits, aluminum, copper, magnesium,steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Catalyst: Anhydride Typical Application: diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, waveguides, electronic modules, flat cable, static shielding, connections, and circuitry. Sheet Resistivity:


Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive
Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive
By Epoxy International
In Stock
$599.99

mpn: Silver-Bond AD1-250,

4.1 out of 5 stars with 64 reviews
Substrates: Excellent choice for Integrated Circuits, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Catalyst: Anhydride Hardness, Shore D: 83 Typical Applications: microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry. Viscosity @ 25 C cps: 6,800 Density gm/cc: 2.35 Silver , %: 70-72 Shelf life: 6 Months


Flexible Plastic Bonder Epoxy, Plastic bonding Adhesive, Structural Strengest AA-BOND 2170, 10ML kit
Flexible Plastic Bonder Epoxy, Plastic bonding Adhesive, Structural Strengest AA-BOND 2170, 10ML kit
By Atom Adhesives
In Stock
$18.99

mpn: AA-BOND 2170-10ML,

4.2 out of 5 stars with 108 reviews
AA-BOND 2170 is a flexible thixotropic bonding adhesive designed for bonding all types of plastics including nylon, PVC, polyethylene, acrylic, lexan, kapton or almost any thermoplastic substrate. AA-BOND 2170 is low viscosity and easy to apply, can cure at room temperature. AA-BOND 2170 is high technology epoxy was formulated for applications in the automotive, medial, aerospace, photonic and assembly industries and can be used anywhere that require excellent chemical fastening to plastic


UV703 High Viscosity UV Adhesive - 100g
UV703 High Viscosity UV Adhesive - 100g
By CR Laurence
In Stock
$67.39
$62.62
You Save: 7%

mpn: UV70310,

4.5 out of 5 stars with 47 reviews
Contents: 100 gUse to Adhere All-Glass Showcases, Shelves, Furniture, Towel Bars, Standoff BasesOptically ClearFast, High-Strength BondsCRL UV703 is a high viscosity, 100% solids, general purpose adhesive that forms resilient, high strength bonds between materials such as glass, steel, aluminum, stainless steel, and many plastics. CRL UV703 is ideal for making all-glass showcases, glass shelves, and glass furniture. This adhesive does not have capillary properties; therefore it must be applied


Electrically Conductive Epoxy Silver Adhesive, Room Temperature Cure, Air Dry AA-DUCT 902, 10gm kit
Electrically Conductive Epoxy Silver Adhesive, Room Temperature Cure, Air Dry AA-DUCT 902, 10gm kit
By Atom Adhesives
In Stock
$35.99

mpn: AA-DUCT 902-10,

4.6 out of 5 stars with 135 reviews
AA-DUCT 902 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm.cm. AA-DUCT 902 is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 902 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver Cure


HNZY 75g + 10g Thermal Conductive Silicone Plaster Viscous Adhesive Compound Cooling Glue for LED GPU Chipset Heatsink
HNZY 75g + 10g Thermal Conductive Silicone Plaster Viscous Adhesive Compound Cooling Glue for LED GPU Chipset Heatsink
By Halnziye
In Stock
$10.64

mpn: 43237-2, ean: 0738770664411,

4.2 out of 5 stars with 78 reviews
* 100% New Heatsink plaster. * Application: apply to all heatsinkf no fixed clip thermal paste. Idea for MOSFET Heatsink,VGA CARD Northbridge Southbridge Heatsink. * Special properties: High Conductivity; low bleed; stable at high temperatures. * Features: thermal properties, strong adhesion * Thermal Resistance: 0.671W/m-K * Dielectric Breakdown: >6.0 KV ac * Maximum Use Temperature: -20℃~250℃. * Strength of connected buildings: 25Kg * Insulation coefficient> 5.1 * Dissipation


FDA Adhesive, Medical Grade Epoxy, 2 Part,Easy Mix Epoxy, AA-BOND FDA2,10 ml Kit
FDA Adhesive, Medical Grade Epoxy, 2 Part,Easy Mix Epoxy, AA-BOND FDA2,10 ml Kit
By Atom Adhesives
In Stock
$19.99

mpn: AA-BOND FDA2-10ml,

4.1 out of 5 stars with 48 reviews
AA-BOND FDA2 is a medium viscosity epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval. It comes an easy mix and dispense system with you mixing tips. AA-BOND FDA2 is two part amber adhesive used and cured at room temperature for bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment and devices.


Silver-Easy-Mix 07 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio Adhesive System
Silver-Easy-Mix 07 Silver Conductive Epoxy Easy 1 to 1 Mix Ratio Adhesive System
By Epoxy International
In Stock
$699.99

mpn: Silver-Easy-Mix 07-250,

4.7 out of 5 stars with 97 reviews
Mix Ratio by weight: 100:100 / Resin:Hardener Glass Transition Temp, Tg: 50 C Minimum Bond Line Thickness: 1mm Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Typical Applications: Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair Viscosity @ 25 C cps: Paste Specific Gravity, mixed: 2.79 Reactive solids contents, %: 100 Pot Life: 1 Hour Shelf Life: 6


Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-bleeding AA-DUCT 2919, 2.5gm kit
Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-bleeding AA-DUCT 2919, 2.5gm kit
By Atom Adhesives
In Stock
$13.99

mpn: AA-DUCT 2919-2.5,

4.4 out of 5 stars with 73 reviews
This is a non-bleeding, electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties. This two-part, thixotropic adhesive of refined pure silver and epoxy resin components is free of solvents and copper or carbon additives. It develops resilient, electrically and thermally conducting bonds and coatings between many different and dissimilar


50mL Bottle Permabond HM165 Green High Temperature / Max Gap Retaining Compound
50mL Bottle Permabond HM165 Green High Temperature / Max Gap Retaining Compound
By PERMABOND
In Stock
$118.97
4.5 out of 5 stars with 126 reviews
Specification:Torque Prevail: 310 lb-inViscosity cP: 2 rpm: 25000, 20 rpm: 10000Shear Strength: 2900 psiColor: GreenPhysical Form: LiquidOdor: MildContainer Size: 50 mLFlashpoint: 230°FCuring Time: Handling - 2 hr, Full - 24 hrStyle: Max GapTorque Breakaway: 35 lb-inType: High Temperature Retaining CompoundContainer Type: BottleSpecific Gravity: 1.100Gap Fill: 0.012''Product Weight: 0.242UOM: eachNotes: Permabond HM165 is a high viscosity aerobic retaining compound that cures when confined


Silver-Bond 24 High Heat Resistance Silver Conductive Epoxy Adhesive Up To 190C
Silver-Bond 24 High Heat Resistance Silver Conductive Epoxy Adhesive Up To 190C
By Epoxy International
In Stock
$599.99

mpn: Silver-Bond 24-250,

4.9 out of 5 stars with 104 reviews
Mix Ratio by weight: 100:5 / Resin:Hardener Substrates: Excellent choice for aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards Typical Application: assembly, manufacture and repair of electronic modules, printed circuits, integrated circuits, electrical contacts, capacitors, wave guides and flat cables, for high-frequency RF shielding, and for applications where a ''hot'' soldering iron is impractical. Mixed Viscosity: 25,000


2-P10 Adhesive Kit
2-P10 Adhesive Kit
By 2-P10KIT
In Stock
$30.00

mpn: 2P-10 KIT, ean: 0663807982025,

4.7 out of 5 stars with 92 reviews
With 2P-10 you can easily glue the hardest joints in cabinetry without clamping! Jel: Will not run, all purpose application, excellent for vertical surfaces. Thick: For use on porous surfaces such as particle board. Medium: For use on smooth surfaces such as melamine and laminate, excellent crack wicking properties. Thin: Excellent micro crack filling and precision mending, zero glue line. Kit includes: 1 - 2+ oz. jel, 1 - 2+ oz. thick, 1 - 2+ oz. medium, 1 - 2+ oz. thin, 1 - 2+ oz. activator,1


MG Chemicals 8331 Silver Epoxy Adhesive - High Conductivity, 10 min working time, 14 g, 2 Dispeners
MG Chemicals 8331 Silver Epoxy Adhesive - High Conductivity, 10 min working time, 14 g, 2 Dispeners
By MG Chemicals
In Stock
$42.95
$42.90

mpn: 8331-14G, ean: 0779008833117,

4.0 out of 5 stars with 7 reviews
The MG Chemicals 8331 is a two-part silver-filled epoxy adhesive with good conductivity and a faster working time than MG Chemicals 8331S adhesive to bond electronic devices, form conductivity seals, and cold solder heat-sensitive materials. It cures at low temperatures to avoid damage to electronic equipment and bonds well to most materials used in such devices. It also provides protection against electromagnetic (EMI) and radio frequency (RFI) interference. The epoxy adhesive resists water,


MG Chemicals 8330S Silver Epoxy Adhesive, Extreme Conductivity, 4 hr. working time, 21 g, 2 Dispeners
MG Chemicals 8330S Silver Epoxy Adhesive, Extreme Conductivity, 4 hr. working time, 21 g, 2 Dispeners
By MG Chemicals
In Stock
$65.00

mpn: 8330S-21G, ean: 0779008833070,

4.8 out of 5 stars with 81 reviews
MG Chemicals 8330S Silver Conductive Epoxy Adhesive with two 7 gram syringes, 3 milliliters each. Slow Cure / Extreme Conductivity is an electronic grade epoxy that combines long working time and high conductivity with ease of use. It has a convenient 1-to-1 mix ratio and 4-5 hours pot life, which once mixed behaves essentially like a 1-part adhesive for the duration of a work shift. However, unlike 1-part adhesives that often require high heat (130 to 170 degree C), it will cure at 65 degree C


Silver-Bond 2LP Silver Electrically Conductive, Room Temp Cure, Long Pot Life
Silver-Bond 2LP Silver Electrically Conductive, Room Temp Cure, Long Pot Life
By Epoxy International
In Stock
$599.99

mpn: Silver-Bond 2LP-250,

4.1 out of 5 stars with 127 reviews
Mix Ratio by weight: 100:6 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Operating Temperature: 50 to +170C Typical Applications: Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair Viscosity @ 25 C cps: Paste Specific Gravity, mixed: 2.79 Reactive solids contents, %: 100 Pot Life: 3 Hours Shelf Life: 1 Year 2 minutes: @ 120C 5 minutes:


MG Chemicals Silver Epoxy Adhesive - High Conductivity, 10 min working time, 460 g, 2-Part Epoxy Kit
MG Chemicals Silver Epoxy Adhesive - High Conductivity, 10 min working time, 460 g, 2-Part Epoxy Kit
By MG Chemicals
In Stock
$667.02
$664.40

mpn: 8331-200ML, ean: 0779008833124,

4.5 out of 5 stars with 53 reviews
The 8331 Silver Conductive Epoxy Adhesive: Moderate Cure is an economical electronic epoxy with good electrical and thermal conductivities. This adhesive bonds very well to a variety of surfaces. It has a convenient 1-to-1 ratio, a workable ten minutes pot life, and a moderate curing rate. It achieves an operational level in five hours at room temperature. With heat, the 8331 cures in less than 15 minutes and maximizes its conductivity. The cured adhesive bonds very well to most substrates used


Parker Chomerics Cho-Bond 1030 4oz Kit
Parker Chomerics Cho-Bond 1030 4oz Kit
By Parker Chomerics
In Stock
$145.00

mpn: 50-02-1030-0000,

4.7 out of 5 stars with 136 reviews
CHO-BOND 1030: CHO-BOND 1030 is a silver plated copper filled, one-component conductive silicone designed for applications where a flexible, strong, conductive electrical bond must be achieved. CHO-BOND 1030 greatly simplifies the problem of bonding conductive silicone EMI gaskets to metal substrates. It is formulated for relatively small bond lines (less than 0.010 inches (0.25mm)), and should not be used as an EMI caulk where bond lines are greater than 0.10 inches (0.25 mm). No volatile


FDA Epoxy, Medical Grade Adhesive, Medium Viscosity, AA-BOND FDA26, 100gm kit
FDA Epoxy, Medical Grade Adhesive, Medium Viscosity, AA-BOND FDA26, 100gm kit
By Atom Adhesives
In Stock
$70.99

mpn: AA-BOND FDA26-100,

4.8 out of 5 stars with 87 reviews
AA-BOND FDA26 is Versatile adhesive guaranteed a high strength bond. AA?BOND FDA26 is two part adhesive used and cured at room temperature for bonding, repair applications by manufacturers of food preparation, processing and packaging equipment and devices. GENERAL PROPERTIES: Appearance Grey Cure Type Heat cure or Room temperature Benefits Excellent durability High shear and peel strength Heat and impact resistant Handy duo-pack cartridges for easy mixing Mix Ratio by weight 100:14 /


Graphite Filled Electrically Conductive Epoxy EMI RFI Shielding Adhesive Military Grade Solvent Free, Electro-Bond 62, 100gm kit(s)
Graphite Filled Electrically Conductive Epoxy EMI RFI Shielding Adhesive Military Grade Solvent Free, Electro-Bond 62, 100gm kit(s)
By ConductiveX
In Stock
$55.99

mpn: Electro-Bond 62-100gm,

4.4 out of 5 stars with 77 reviews
http://conductivex.com/Graphite-Filled-Electrically-Conductive-Epoxy-EMI-RFI-Shielding-Adhesive-Military-Grade-Solvent-FreeElectro-Bond 62 is a two parts adhesives, graphite filled epoxy designed for Esd/Emi Shielding of semiconductor devices and electronics. Electro-Bond 62 can be used in many electronic application. Electro-Bond 62 is free of solvents, develops strong and durable, bonds to different and dissimilar materials such as metals, ceramics, glass .Appearance - GreyBenefits - EMI &



Viewing Page 2 of 5

View more products in Tapes, Adhesives & Sealants.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.