Conductive Adhesives - Page 3 - Blowout Sale! Save up to 66%


Blowout Sale! Up to 66% off on Conductive Adhesives at Steel City Robotics, Page 3. Top brands include Kraftex, MG Chemicals, ConductiveX, Atom Adhesives, G6-Epoxy, Epoxy International, PERMABOND, & AIYUNNI. Hurry! Limited time offers. Offers valid only while supplies last.



Copper Foil Tape with Conductive Adhesive (1inch X 12yards) - Slug Repellent, EMI Shielding, Stained Glass, Paper Circuits, Electrical Repairs - Extra Long Value Pack At A Great Price
By Kraftex
In Stock
$35.00
$11.90
You Save: 66%

mpn: CT, ean: 0683203920681,

4.5 out of 5 stars with 17 reviews
Self-adhesive copper foil tape. Each roll is 12yards long and 1 inch wide. The tape has Dual conductivity so current will flow through both sides and the adhesive. One side is coated with a strong adhesive which is protected by paper backing on the roll. Tape is resistant to oxidization and discoloration. Suitable for indoor and outdoor use. The tape has a wide variety of uses and will perform perfectly when applied in the following roles: EMI guitar shielding, slug repellent, snail


MG Chemicals 8329TFM Thermally Conductive Adhesive, Medium Cure, 25 milliliters Dual Dispenser
By MG Chemicals
In Stock
$23.95

mpn: 8329TFM-25ML, ean: 0779008832554,

4.4 out of 5 stars with 25 reviews
This thermally conductive adhesive is a two-part, smooth, Dark Grey paste that cures to form a hard, durable polymer that is extremely thermally conductive, yet electrically insulating. It is filled with thermally conductive ceramic powders for excellent thermal conductivity. It bonds well to metals, ceramics, glass, and most plastics used in electronic assemblies. It has a convenient 1-to-1 mix ratio, a 45 minutes working life, and a moderate curing rate. It can be cured in 24 hours at room


Thermally Conductive Silicone Grease Mil-Spec High Heat Transfer System Industrial Military Grade, Thermo-Grease 04, 50gm jar(s)
By ConductiveX
In Stock
$39.99

mpn: Thermo-Grease 04-50gm,

4.4 out of 5 stars with 102 reviews
http://conductivex.com/Thermally-Conductive-Silicone-Grease-Mil-Spec-High-Heat-Transfer-System-Industrial-Military-GradeThermo-Grease 04 is an opaque white heat sink grease compound, which is applied to the base and mounting studs of transistor and diodes to provide a positive heat sink seal, this facilitates heat transfer away from electrical/electronic components and into heat sinks, thereby increasing the overall efficiency and performance of the device. GR104 is grease like silicone


Silver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-DUCT 904 , 2.5gm Syringe
By Atom Adhesives
In Stock
$13.99

mpn: AA-DUCT 904-2.5,

4.8 out of 5 stars with 137 reviews
AA-DUCT 904 is a single component, heat curing, conductive epoxy that was designed for ease in handling. This high performance conductive epoxy cures quickly at elevated temperatures making it ideally suited for rapid processing and assembly. AA-DUCT 904 offers excellent mechanical, electrical, and physical properties at continuous operating temperatures up to 175°C. This versatile silver conductive adhesive can be used for chip bonding in micro and opto-electronic hybrid circuit fabrication.


Thermally Conductive Electrically Insulating Low Thermal Expansion Adhesive Epoxy Adhesive , Thermo-Bond 110, 50gm kit(s)
By ConductiveX
In Stock
$39.99

mpn: Thermo-Bond 110-50gm,

4.0 out of 5 stars with 75 reviews
http://conductivex.com/Thermally-Conductive-Electrically-Insulating-Low-Thermal-Expansion-Adhesive-Epoxy-Adhesive Thermo-Bond 110 is flame retardant and is designed to meet the rigid requirement of UL-94-V0.  Thermo-Bond 110 is heavily filled alumina oxide epoxy formulations characterized by outstanding physical, electrical, insulation, and thermal dissipation properties which exhibit exceptional thermal conductivity, low thermal expansion, as well as excellent chemical and solvent


FDA Epoxy, Medical Grade Adhesive, Two Part, AA-BOND FDA8 , 10gm kit
By Atom Adhesives
In Stock
$12.99

mpn: AA-BOND FDA8-10,

4.0 out of 5 stars with 16 reviews
AA-BOND FDA8 EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300. GENERAL PROPERTIES: Appearance Amber Cure Type Heat cure Benefits Low viscosity Easily mixed Effective electrical insulator Low permeability to gases and vapors Mix Ratio by weight 100:100 / Resin:Hardener Operating


MG Chemicals Super Shield Silver Conductive Coating, 5 oz, Aerosol Can
By MG Chemicals
In Stock
$122.56

mpn: 842-140G, ean: 0779008842263,

4.1 out of 5 stars with 58 reviews
The 842 Silver Conductive Coating is an extremely conductive acrylic paint designed to reduce electromagnetic or radio frequency interference (EMI/RFI). Long-term protection from EMI/RFI is assured by its durable acrylic resin that minimizes loss of metallization through rubbing, and by the oxidation resistant silver that slows down conductivity degradation with age. The flake shape helps ensure maximum points of contact to ensure better conductivity. In addition, loss of shielding through


Flexible Carbon Epoxy Electrically Conductive Flexible Adhesive 1 to 1 Mix Ratio Military Shielding, Electro-Bond F64, 10ml Easy Dispense System
By ConductiveX
In Stock
$15.99

mpn: Electro-Bond F64-10ml,

4.4 out of 5 stars with 70 reviews
http://conductivex.com/Flexible-Carbon-Epoxy-Electrically-Conductive-Flexible-Adhesive-1-to-1-Mix-Ratio-Military-ShieldingElectro-Bond 64 is a Flexible epoxy adhesive and coating formulation based on conductive carbon . Electro-Bond 64 is recommended for electronic bonding and sealing applications that required both electrical and mechanical properties. Electro-Bond 64 cures at room temperature or can be accelerated with mild heat to form strong bond between similar and dissimilar


Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-DUCT 902, 50gm kit
By Atom Adhesives
In Stock
$153.99

mpn: AA-DUCT 902-50,

4.1 out of 5 stars with 71 reviews
AA-DUCT 902 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm.cm. AA-DUCT 902 is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 902 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver Cure


CARBON FILLED CONDUCTIVE EPOXY G6E-P (PART A-20g+PART B-10g)
By G6-Epoxy
In Stock
$30.00

ean: 0816293020485,

4.5 out of 5 stars with 65 reviews
G6-EpoxyTM G6E-P is a two component electrically conductive epoxy for high performance bonding, sealing and coating. We use a proprietary mix of high-performance carbon filler to achieve superb electrical properties for a non-metallic electrically conductive epoxy. It can cure at room temperature or more rapidly at elevated temperatures. The optimum cure schedule is overnight at 25°C followed by 4 hours at 80°C. G6E-P has a thick paste consistency after mixing and bonds well to a wide variety


Silver Adhesive Electrically Conductive Epoxy Bonding HEAT CURE 1 Part AA-DUCT 2979, 2.5gm Syringe
By Atom Adhesives
In Stock
$13.99

mpn: AA-DUCT 2979-2.5,

4.1 out of 5 stars with 90 reviews
AA-DUCT 2979 is a fast curing one part epoxy adhesive with superior electrical conductivity and bonding capability. AA-DUCT 2979 has been shown to retain their properties through hundreds of hours of rapid temperature cycling and has also high impact absorption and stress resistance. GENERAL PROPERTIES: Appearance Silver Cure Type Heat cure Benefits High strength Excellent mechanical, electrical properties Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, ceramic,


Thermally Conductive FDA Food Grade Epoxy Medical Manufacturing Adhesive Staking Casting Bonding, Thermo-Bond 26, 50gm kit(s)
By ConductiveX
In Stock
$39.99

mpn: Thermo-Bond 26-50gm,

4.7 out of 5 stars with 91 reviews
http://conductivex.com/Thermally-Conductive-FDA-Food-Grade-Epoxy-Medical-Manufacturing-Adhesive-Staking-Casting-BondingThermo-Bond 26 is versatile food grade adhesive guaranteed a high strength bond. Thermo-Bond 26 is two parts adhesive used and cured at room temperature for bonding, repair applications by manufacturers of medical food preparation, processing and packaging equipment and devices.Appearance - GreyBenefits - Designed for electronics applications, for the assembly line


Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-DUCT 907 , 10 gm kit
By Atom Adhesives
In Stock
$39.99

mpn: AA-DUCT 907-10,

4.2 out of 5 stars with 19 reviews
AA-DUCT 907 is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm.cm. AA-DUCT 907 is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 907 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver Cure


Stone-Bond 1 Super Strong Bonding Agent 2 hour Quick Drying
By Epoxy International
In Stock
$14.99

mpn: Stone-Bond 1-,

4.7 out of 5 stars with 78 reviews
Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plastics Operating Temperature: -60 to 110 C Typical Application(s): Anything requiring the unique properties this adhesive offers Pot Life: 5 minutes Viscosity @ 25 C, mPas (cP): Thixotropic Solids Content: 100% Specific Gravity, mixed: 1.2 g/cc 30 minutes: @ 65C 2 hours: @ 25C Volume Resistivity: 5.00e+11 ohm-cm


Flexible-Silver 19 Electrically Conductive, Silver-Filled Epoxy Adheisve
By Epoxy International
In Stock
$642.99

mpn: Flexible-Silver 19-250,

4.4 out of 5 stars with 87 reviews
Mix Ratio by weight: 90:100 / Resin:Hardener Substrates: Metal, ceramics, glass and plastic Thixotropic Index: 4.9 Typical Application: Assembly and repair of electrical modules, flexible circuits, membrane switches, wave guides, flat cable and high frequency shieldsElectronic bonding, coating, and sealing applicationsCan be used as a flexible ''cold-solder'' 4 hours: @ 65C 24 hours: @ 25C Specific Gravity, mixed: 2.32 g/cc Pot Life: 30 min Solid Content: 100 % Volatile Organic Compounds (VOC)


Iron-Bond 24 Epoxy Adhesive Strongest Bonding Agent 24 hour Adhesion
By Epoxy International
In Stock
$18.99

mpn: Iron-Bond 24-,

4.8 out of 5 stars with 122 reviews
Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: Irons, glass, ceramics, wood and many plastics Operating Temperature: -60 to 163 C Typical Application(s): Staking components, bonding, laminating and repair applications Specific Gravity, mixed: 1.07 Reactive solids contents, %: 100 Pot Life: 60 minutes 4 to 6 hours: @ 65C 24 hours: @ 25C Shelf Life: 2 years closed packaging Glass Transition Temp, Tg: 93C Hardness, Shore D: 78 Lap shear: 2900 psi (Alum to Alum) Iron-Bond is a two part,


Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-DUCT 902LP, 5gm kit
By Atom Adhesives
In Stock
$20.99

mpn: AA-DUCT 902LP-5,

4.5 out of 5 stars with 67 reviews
AA-DUCT 902LP is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm-cm. AA-DUCT 902LP is also characterized by a wide operating temperature range from -50 to +170°C. AA-DUCT 902LP is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES: Appearance Silver


50mL Bottle Permabond UV630 Low Viscosity UV Curable Adhesive Plastic Bonding
By PERMABOND
In Stock
$103.26
4.1 out of 5 stars with 129 reviews
Specification:Viscosity cP: 200 - 300Chemical Base: Urethane MethacrylateColor: ClearPhysical Form: LiquidApplication: PlasticContainer Size: 50 mLTemperature: -65°F - 250°FStyle: Low ViscosityType: Light Cure AdhesiveContainer Type: BottleGap Fill: 0.008''Specific Gravity: 1.1000Product Weight: 0.242UOM: eachNotes: PERMABOND UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics


Copper Tape,AIYUNNI (50mm x 20m) Copper Foil Tape with Conductive Adhesive for Slug & Snail Repellent,Guitar & EMI Shielding,Stained Glass,Paper Circuit,Electrical Repair,Grounding
By AIYUNNI
In Stock
$14.99

mpn: AIYUNNI-22, ean: 0704619606911,

4.9 out of 5 stars with 117 reviews
Product Feature: - Each roll is 21.9yards long & 2 inch wide. - Heat preservation, heat insulation - Waterproof, cold and heat resistance - Strong adhesion and easily peeled off - EMI shielding - UV resistance, flame retardant - Moisture resistance, chemical and corrosion resistance - Ideal for outdoor application and durable Application: - Double conductive - Eliminate the effect of EMI - Avoid unnecessary current and voltage - Repeller the snails or slugs


Nickel-Bond 3 Electrically Conductive, Nickel Filled Epoxy Adhesives, Room Temp Cure
By Epoxy International
In Stock
$59.99

mpn: Nickel-Bond 3-50,

4.0 out of 5 stars with 73 reviews
Mix Ratio by weight: 100:5 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Minimum Bond Line Thickness: 1mm Glass Transition Temp, Tg: 50 C Typical Applications: Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair Viscosity @ 25 C cps: Paste Specific Gravity, mixed: 2.79 Reactive solids contents, %: 100 Pot Life: 1 Hour Shelf Life: 1 Year



Viewing Page 3 of 5

View more products in Tapes, Adhesives & Sealants.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.