Gears - Extreame Savings! Save up to 45%


Extreame Savings! Up to 45% off on Gears at Steel City Robotics. Top brands include Dayton, Boston Gear, Alemite, Maedler, Nemco, yld, Walfront, A&I, AB, & UJ Ramelson Co. Hurry! Limited time offers. Offers valid only while supplies last.



ECM Direct-Drive Motor, Dayton, 43Y138
ECM Direct-Drive Motor, Dayton, 43Y138
By Dayton
In Stock
$993.68

mpn: 43Y138, ean: 0190735299050,

4.9 out of 5 stars with 87 reviews
Product Details: ECM Direct-Drive Motor, HP 3/4, Voltage 115, 1 Phase, Nameplate RPM 1725, Application Convert Exhaust Fan to a Variable Speed Fan, For Use With 16D519, 16D520, 16D521, 5DVR3, 5DVT4, 6KWJ0, 5DVR4, 6KWJ1,G8527303Application: Convert Exhaust Fan to a Variable Speed Fan. For Use With: 16D519, 16D520, 16D521, 5DVR3, 5DVT4, 6KWJ0, 5DVR4. Voltage: 115. Phase: 1. HP: 3/4.


Boston Gear GB71B Plain Change Gear, 14.5 Degree Pressure Angle, 16 Pitch, 0.750'' Bore, 71 Teeth, Cast Iron
Boston Gear GB71B Plain Change Gear, 14.5 Degree Pressure Angle, 16 Pitch, 0.750" Bore, 71 Teeth, Cast Iron
By Boston Gear
In Stock
$99.47

mpn: GB71B, ean: 0781711110027,

4.7 out of 5 stars with 112 reviews
CHANGE GEAR, 16 DP, 14 1/2 PA, 71 TEETH, CAST IRONWith double keyway only.


Boston Gear ND11B-1/2 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 12 Pitch, 0.500'' Bore, 1.167'' OD, 0.750'' Face Width, 11 Teeth
Boston Gear ND11B-1/2 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 12 Pitch, 0.500" Bore, 1.167" OD, 0.750" Face Width, 11 Teeth
By Boston Gear
In Stock
$40.62

mpn: ND11B-1/2, ean: 0781711460603,

4.5 out of 5 stars with 79 reviews
The Boston Gear low carbon steel spur gear with 14.5-degree pressure angle (PA) and a diametral pitch (DP) of 12 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 14.5-degree pressure angle for a higher contact ratio between gears than larger pressure angles, resulting in quieter operation, and a 12-diametral pitch for applications requiring a balance between transferring torque and controlling changes in speed and direction of


Boston Gear L96Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.250'' Bore, 0.906'' Mounting Distance, 24 Pitch, 24 Teeth, Steel
Boston Gear L96Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.250" Bore, 0.906" Mounting Distance, 24 Pitch, 24 Teeth, Steel
By Boston Gear
In Stock
$19.00

mpn: L96Y, ean: 0781711121443,

4.4 out of 5 stars with 139 reviews
This steel Boston Gear L series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of low carbon steel (.2 percent carbon), and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears


Boston Gear HL152Y-P Bevel Pinion Gear, 2:1 Ratio, 0.625'' Bore, 12 Pitch, 18 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth
Boston Gear HL152Y-P Bevel Pinion Gear, 2:1 Ratio, 0.625" Bore, 12 Pitch, 18 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth
By Boston Gear
In Stock
$64.80

mpn: HL152YP, ean: 0781711118764,

4.0 out of 5 stars with 83 reviews
This Boston Gear HL152Y-P bevel pinion gear has a straight bevel, a 12 diametral pitch, 18 case-hardened steel teeth, and a keyway to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an HL152Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a keyway and setscrew for use with a 0.625'' diameter keyed shaft (not included), is made of low carbon steel (0.2 percent carbon), and


Alemite 9911-1 Portable High Pressure PML Pump, 3/8'' Female NPTF Outlet
Alemite 9911-1 Portable High Pressure PML Pump, 3/8" Female NPTF Outlet
By Alemite
SKU: #025-9911-1
In Stock
$877.38
$813.40
You Save: 7%

sku: 025-9911-1, mpn: 9911-1, ean: 0098468333006,

4.5 out of 5 stars with 25 reviews
Oil and grease guns are handheld tools that inject lubricant (dispensed from the barrel or cylinder cartridge) into metal mechanical assemblies. Electric and air-powered grease guns can dispense large volumes of lubricant in commercial applications, while battery-powered (cordless) grease guns are more suitable for mobile and remote applications. Manual grease guns (lever, pistol-grip, screw-type, push-type, and suction) vary in duty and have either a rigid or flexible hose extension for


Gear rack made of POM module 2 tooth width 16mm height 16mm length 1000mm
Gear rack made of POM module 2 tooth width 16mm height 16mm length 1000mm
By Maedler
In Stock
$54.02

mpn: 29660500,

4.3 out of 5 stars with 46 reviews
Material:Module 0.5: PET, milled teeth. From module 0.7: POM, milled teeth. Because of the material used, plastic gear racks are not straightened.Either slim version or wide version (from Module 1 to Module 3).Straight teeth. Pressure angle 20°.From Module 2, except for nominal length 500 mm, cut for continuous linking.* Length = Nominal length. The real length is roughly one multiple of the pitch.Module2,0b [mm]16ha [mm]16h0 [mm]14,0Nominal Length L* [mm]1000MaterialPOMWeight [g]312Material:


Nemco 55667 Pinion
Nemco 55667 Pinion
By Nemco
In Stock
$104.90
$58.11
You Save: 45%

mpn: 55667, ean: 0212241343949,

4.9 out of 5 stars with 88 reviews
Nemco 55667 Pinion. This is a genuine OEM (Original Equipment Manufacturer) part. Nemco innovates countertop foodservice equipment including Dicers, Slicers, Steamers, Fryers, Food Warmers, Heat Lamps & More.Genuine oem replacement part. Nemco innovates countertop foodservice equipment including Dicers, Slicers, Steamers, Fryers, Food Warmers, Heat Lamps & More. Use genuine oem parts for safety reliability and performance.


VGZE60Servo Reducer Planetary Gear Reducer,High precision, high bearing torque, low noise, stable op
VGZE60Servo Reducer Planetary Gear Reducer,High precision, high bearing torque, low noise, stable op
By yld
In Stock
$819.99

mpn: VGZE60, ean: 6118725642536,

4.8 out of 5 stars with 23 reviews
Technical parameters Model: VGZE60 tsages 1 Nominal torquet TN (Unit:Nm) Ratos(i) 15.8 3 25.5 4 27.5 5 19.2 7/8 12.0 10 tsages 2 Nominal torquet TN (Unit:Nm) Ratos(i) 28. 12 29.5 16 29.5 20 31.5 25 29.5 28/32 31.5 35 29.5 40 31.5 50/56 22.5 70/64 tsages 3 Nominal torquet TN (Unit:Nm) Ratos(i) 35.5 80 35.5 100 38.5 125 35.5 140/160 38.5 175 35.5 200 38.5 250/256 35.5 280 38.5 350/320 37.0 400 40.0 500/512 27.0 700 17.2 1000 Max.output torque T2n(Nm) 2*Nominal torquet backlash


DC Worm Gear Motor 12V High Torque Reduction Gear Box with Encoder Srong Self-locking 6mm Output Shaft(40RPM)
DC Worm Gear Motor 12V High Torque Reduction Gear Box with Encoder Srong Self-locking 6mm Output Shaft(40RPM)
By Walfront
In Stock
$17.99

mpn: walfrontz6k1co4w2a-04, ean: 0736691272401,

4.6 out of 5 stars with 109 reviews
Specifications: Rated Voltage: DC 12V No-loading Revolving Speed(Optional): 100rpm / 40rpm / 30rpm / 20rpm / 10rpm 10RPM    Rated Torque 22.5 kg.cm   Max.Torque 25kg.cm    Reduction Ratio 600 20RPM    Rated Torque 12 kg.cm      Max.Torque 25kg.cm    Reduction Ratio 340 30RPM    Rated Torque 7.4 kg.cm     Max.Torque 25kg.cm    Reduction Ratio 200 40RPM    Rated Torque 5.6 kg.cm     Max.Torque 24kg.cm    Reduction Ratio 150 100RPM   Rated Torque 1.5


Boston Gear L147Y-G Bevel Gear, 2:1 Ratio, 0.375'' Bore, 20 Pitch, 20 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel
Boston Gear L147Y-G Bevel Gear, 2:1 Ratio, 0.375" Bore, 20 Pitch, 20 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel
By Boston Gear
In Stock
$33.10

mpn: L147YG, ean: 0781711122341,

4.6 out of 5 stars with 28 reviews
This Boston Gear L147Y-G bevel gear has a 20 diametral pitch, 20 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an L147Y-P bevel pinion gear for applications requiring a 2:1 gear ratio. It has a 0.375'' bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to


Boston Gear GB1072A Worm Gear, Web, 14.5 PA Pressure Angle, 1.000'' Bore, 40:1 Ratio, 40 TEETH, RH
Boston Gear GB1072A Worm Gear, Web, 14.5 PA Pressure Angle, 1.000" Bore, 40:1 Ratio, 40 TEETH, RH
By Boston Gear
In Stock
$240.50

mpn: GB1072A, ean: 0781711136584,

4.9 out of 5 stars with 56 reviews
WORM GEAR, 8 DP, 14.5 PA, 40 TEETH, RH, BRONZEMating worm is 8 DP, SINGLE THREAD. O/P Rating (LB-IN): 1190.0 pounds per inch.


Boston Gear PA4212Y-G Bevel Gear, 2:1 Ratio, 0.625'' Bore, 12 Pitch, 48 Teeth, 20 Degree Pressure Angle, Straight Bevel, Cast Iron
Boston Gear PA4212Y-G Bevel Gear, 2:1 Ratio, 0.625" Bore, 12 Pitch, 48 Teeth, 20 Degree Pressure Angle, Straight Bevel, Cast Iron
By Boston Gear
In Stock
$98.80

mpn: PA4212YG, ean: 0781711124888,

4.0 out of 5 stars with 131 reviews
This Boston Gear PA4212Y-G bevel gear is made of cast iron, has a 12 diametral pitch, 48 teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA4212Y-P bevel pinion gear for applications requiring a 2:1 gear ratio. It has a 0.625'' bore diameter, is made of ASTM A48 Class 30 gray cast iron for resistance to wear, corrosion, and galling, and has unhardened teeth


Planetary Pinion Gear
By A&I, AB
In Stock
$656.50

mpn: AM87674600,

4.9 out of 5 stars with 91 reviews
Planetary Pinion Gear - Magnum 290 (Class 5), Magnum 305 (Class 5), Magnum 310 (Class 5), Magnum 315 (Class 5), Magnum 335 (Class 5), Magnum 340 (Class 5)We have the best quality products in all brands, price and excellent after-sales service. FITS - Magnum 290 (Class 5), Magnum 305 (Class 5), Magnum 310 (Class 5), Magnum 315 (Class 5), Magnum 335 (Class 5), Magnum 340 (Class 5).


Boston Gear G1048 Worm Gear, Spoke, 14.5 PA Pressure Angle, 0.375'' Bore, 60:1 Ratio, 60 TEETH, RH
Boston Gear G1048 Worm Gear, Spoke, 14.5 PA Pressure Angle, 0.375" Bore, 60:1 Ratio, 60 TEETH, RH
By Boston Gear
In Stock
$78.20

mpn: G1048, ean: 0781711136201,

4.0 out of 5 stars with 58 reviews
WORM GEAR, 16 DP, 14.5 PA, 60 TEETH, RH, BRONZEMating worm is 16 DP, SINGLE THREAD. O/P Rating (LB-IN): NOT RATED.


Boston Gear G237 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 16 Pitch, 0.313'' Bore, 2.125'' OD, 0.313'' Face Width, 32 Teeth
Boston Gear G237 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 16 Pitch, 0.313" Bore, 2.125" OD, 0.313" Face Width, 32 Teeth
By Boston Gear
In Stock
$40.30

mpn: G237, ean: 0781711091883,

4.6 out of 5 stars with 144 reviews
The Boston Gear brass spur gear with 14.5-degree pressure angle (PA) and a diametral pitch (DP) of 12 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 14.5-degree pressure angle for a higher contact ratio between gears than larger pressure angles, resulting in quieter operation, and a 12-diametral pitch for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation


German Red Pitch (4.4 lb)
German Red Pitch (4.4 lb)
By UJ Ramelson Co
In Stock
$54.57

mpn: redpitch,

4.5 out of 5 stars with 100 reviews
Our Best Quality German Red PitchGerman red pitch is preferred over other choices as it is less brittle, yields better results and has a much greater plasticity at lower temperatures (even at room temperature). If the pitch is too hard, the metal will be thinned. If it is too soft, there is very little control over the form. For your own protection, German red pitch is less toxic than other available options such as black and dark green pitches. Red pitch melts at around 110° F so all you need


Boston Gear G463Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.188'' Bore, 32 Pitch, 24 Teeth, Brass
Boston Gear G463Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.188" Bore, 32 Pitch, 24 Teeth, Brass
By Boston Gear
In Stock
$31.22

mpn: G463Y, ean: 0781711121160,

4.2 out of 5 stars with 59 reviews
This brass Boston Gear G series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree


Boston Gear H3220 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 32 Pitch, 0.250'' Bore, 0.687'' OD, 0.188'' Face Width, 20 Teeth
Boston Gear H3220 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 32 Pitch, 0.250" Bore, 0.687" OD, 0.188" Face Width, 20 Teeth
By Boston Gear
In Stock
$20.50

mpn: H3220, ean: 0781711095409,

4.3 out of 5 stars with 77 reviews
The Boston Gear low carbon steel spur gear with 14.5-degree pressure angle (PA) and a diametral pitch (DP) of 32 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 14.5-degree pressure angle for a higher contact ratio between gears than larger pressure angles, resulting in quieter operation, and a 32-diametral pitch for applications for applications where controlling changes in speed and direction of rotation with precision is


Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500'' Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel
Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel
By Boston Gear
In Stock
$22.90

mpn: PA4416YP, ean: 0781711124949,

4.9 out of 5 stars with 58 reviews
This Boston Gear PA4416Y-P bevel pinion gear has a 16 diametral pitch, 16 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA4416Y-G bevel gear for applications requiring a 4:1 gear ratio. It has a 0.500'' bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed



Viewing Page 1 of 6

View more products in Power Transmission Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.