Optoelectronic Displays - Page 2 - On Sale Now! Save up to 10%


On Sale! Up to 10% off on Optoelectronic Displays at Steel City Robotics, Page 2. Top brands include REDINGTON COUNTERS, Monitech, seeed studio, Adafruit, MakerFocus, SMAKN®, RAB Lighting, Waveshare -LCD, Walfront, HiLetgo®, WENDi, SMAKN, for HP, KEYART, & GEC. Hurry! Limited time offers. Offers valid only while supplies last.



REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTER
REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTER
By REDINGTON COUNTERS
In Stock
$54.43

mpn: P2-4816,

4.3 out of 5 stars with 88 reviews
REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTERPrice For: Each No. of Digits / Alpha: 6 Digit Height: 4.3mm Supply Voltage Range: 115V AC Power Consumption: 3.5W Panel Cutout Height: 26.67mm Panel Cutout Width: 43.69mm Character Size: 0.17'' Depth: 2.25'' RoHS Compliant: Yes.


Cincinnati Milacron 850 AND 950 LCD upgrade - Replaces 14'' CRT EASY TO INSTALL
Cincinnati Milacron 850 AND 950 LCD upgrade - Replaces 14" CRT EASY TO INSTALL
By Monitech
In Stock
$634.99

mpn: ML121QT950-R/850-R,

4.6 out of 5 stars with 13 reviews
.


Grove - LCD RGB Backlight
Grove - LCD RGB Backlight
By seeed studio
In Stock
$19.50

mpn: 43237-2, ean: 0088234728457,

4.2 out of 5 stars with 23 reviews
This Grove LCD Display Board enables you to set the color to whatever you like via the simple and concise Grove interface. It takes I2C as communication method with your microcontroller. Grove - LCD RGB Backlight supports user-defined characters.Includes Open Source Software for Arduino and Raspberry Pi. Selectable Full Color Backlight. 5V. CGROM 64*8 bit for custom characters. Full Documentation and Software on store.switchdoc.com.


Adafruit 0.56'' 4-digit 7-segment Display W/i2c Backpack (Green)
Adafruit 0.56" 4-digit 7-segment Display W/i2c Backpack (Green)
By Adafruit
In Stock
$11.05
$9.99
You Save: 10%

mpn: JP-6ZVG-FMU1, ean: 0793936891773,

4.3 out of 5 stars with 104 reviews
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a


MakerFocus 4pcs 8-Digit 7 Segment Module MAX7219 8 Bit Digital Segment Tube LED Display Module Supports Cascade Eight Bit Serial 3 IO Ports for Arduino MCU/51/AVR/STM32
MakerFocus 4pcs 8-Digit 7 Segment Module MAX7219 8 Bit Digital Segment Tube LED Display Module Supports Cascade Eight Bit Serial 3 IO Ports for Arduino MCU/51/AVR/STM32
By MakerFocus
In Stock
$11.99

mpn: T59SNA6UUWSG18O11KSAZJ, ean: 0192684016764,

4.3 out of 5 stars with 58 reviews
Description:MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also a 8x8 static RAM that stores each data. Only one external register is used to set the current of each LED segment.A convenient four-wire serial interface can connect all


MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino
By MakerFocus
In Stock
$10.99

mpn: 43237-2, ean: 0190033904335,

4.1 out of 5 stars with 82 reviews
2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for ArduinoDescription:OLED display, no need backlight, self-illumination.The display performance is better than the traditional LCD display, also lower consumption.Specifications:Driver IC: SSD1306Size: 0.91 inch OLEDResolution: 128 x 32Size: 38 * 12 mmInterface Type: IIC interfaceDisplay Color: BluePin Description:GND: Power GroundVCC: Power + (DC 3.3 ~5v)Operating temperature:-40 ~


SMAKN® 3 1/2 AC/DC Digital Display LCD Resistance Meter Ohmmeter Impedance Tester 0-2K Ohm Measure
SMAKN® 3 1/2 AC/DC Digital Display LCD Resistance Meter Ohmmeter Impedance Tester 0-2K Ohm Measure
By SMAKN®
In Stock
$13.60

mpn: EVM282, ean: 0709127309293,

4.9 out of 5 stars with 48 reviews
Operating voltage: AC/DC8-12V Operating Current: < / = 15mA Dimensions: 79(L) x 43(W) x 25(D) mm Installation hole: 75 x 39.5 mm Weight: about 60g Measuring range: 0 ~ 1.999K Ohm Minimum resolution: 1 Ohm Measurement rate: >/= 2 times / S Zero adjustment: IN + and IN- shorted conection display ''0000'' No signal input or over range show: 1 Working temperature: -10 ~ +50 °c Operating Humidity: 10 ~ 80% (non-condensing) Working pressure: 80 ~ 106kPa Sunlight: No direct


RAB Lighting FFLED52 FFLED 52W LED Floodlight, 5000 K (Cool) Color Temp, Arm Mounted, Standard Type, Bronze Finish
RAB Lighting FFLED52 FFLED 52W LED Floodlight, 5000 K (Cool) Color Temp, Arm Mounted, Standard Type, Bronze Finish
By RAB Lighting
In Stock
$284.98

mpn: FFLED52, ean: 0795525793390,

4.0 out of 5 stars with 49 reviews
The RAB Lighting FFLED52 is a rectangular shaped LED floodlight designed to replace 175W metal halide lights. The floodlight is made of die-cast aluminum housing with a specular polycarbonate reflector and contains patent pending airflow technology designed to ensure a long LED lifespan with a 100,000 hour life based on LM-80 tests. With a NEMA beam spread of 7H x 6V the floodlight is perfect for building facade lighting, sign lighting, LED landscape lighting and instant-on security lighting.


Waveshare 4inch HDMI LCD Resistive Touch Screen 800x480 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3 B/2B/B +/B
Waveshare 4inch HDMI LCD Resistive Touch Screen 800x480 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3 B/2B/B +/B
By Waveshare -LCD
In Stock
$42.99

mpn: 4inch HDMI LCD, ean: 0614961950160,

4.4 out of 5 stars with 39 reviews
Feature 800x480 high resolution Resistive touch control IPS technology, high quality and perfect displaying from very wide viewing angle Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu directly) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the


1Pcs 2.42'' 128X64 OLED Display Module 12864 IIC I2C Serial Peripheral Interface for UNO R3(White Letter)
1Pcs 2.42" 128X64 OLED Display Module 12864 IIC I2C Serial Peripheral Interface for UNO R3(White Letter)
By Walfront
In Stock
$30.99

mpn: ASINPPOKAL12198,

4.0 out of 5 stars with 138 reviews
Specifications: Display Size: 2.42'' Text Color: Yellow, Blue, White, Green(Optional) Resolution: 128x64 Driver IC: SSD1309 Serial Peripheral Interface Pins: 1.GND(Power Supply Ground) 2.VCC(Power Supply Positive) 3.SCL(Clock Line) 4.SDA(Data Line) 5.RES(Reset Line) 6.DC(Data/Command) 7.CS(Chip Select) Tips: The seventh pin CS signal is leaded by default; If you do not need it, you can solder R18, then CS signal is directly grounded. You can use Serial Peripheral Interface or IIC, and the


HiLetgo 2pcs 1.3'' IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32
HiLetgo 2pcs 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32
By HiLetgo®
In Stock
$14.49

mpn: 3-01-1261-A-2pcs,

4.5 out of 5 stars with 89 reviews
Specifications: 1. Driver IC: SSH1106 or SSD1306. 2. Viewing angle: >160 3. Voltage: DC 3V-5V 4. Work temp : -30c-70c 5. Interface: IIC I2C 6. Font Color: White IIC Pin definition: GND: Power Ground. VCC: Power + (DC 3.3 ~5v). SCL: Clock Line. SDA: Data Line. Package included: 2* 1.3'' OLED LCD Display Module IIC I2C Serial Note: We have SPI interface on sale too, please search at HiLetgo Store if you need.Driver IC: SSH1106.Resolution: 128*64. Four square holes are easy to install. Ultra-low


@WENDi TFT 7inch Resistive Multicolor Graphic LCD, LED Backlight, 800 X 480 Pixel, RA8875 Chip For SCM LCD
@WENDi TFT 7inch Resistive Multicolor Graphic LCD, LED Backlight, 800 X 480 Pixel, RA8875 Chip For SCM LCD
By WENDi
In Stock
$49.99

mpn: 1, ean: 0722204890217,

4.5 out of 5 stars with 63 reviews
Why You Need It£¿ 7 inch 800*480 Multicolor Graphic LCD, with resistive touch screen, offers you a great eyes view and use feeling. It is embedded geometric speed-up engine, and has programmable font write cursor. SPECIFICATIONS -LCD Type: TFT -Interface: 8080 series interface -LCD Controller: RA8875 -Touch Panel Type: Resistive -Color Depth: 256/16K -Backlight: LED -Display Size (mm): 154.08 (W) ¡Á 85.92 (H) -Dot Pitch (mm): 0.0642 (W) ¡Á 0.1790 (H) -Aspect Ratio: 8 : 5 -Resolution: 800


SMAKN® 3 1/2 AC/DC Digital Display LCD Resistance Meter Ohmmeter Impedance Tester 0-20K Ohm Measure
SMAKN® 3 1/2 AC/DC Digital Display LCD Resistance Meter Ohmmeter Impedance Tester 0-20K Ohm Measure
By SMAKN
In Stock
$14.12

mpn: EVM396, ean: 0709127315577,

4.9 out of 5 stars with 72 reviews
Operating voltage: AC/DC8-12V. Operating Current: < / = 15mA. Measuring range: 0 ~ 19.99K Ohm. Minimum resolution: 10 Ohm. Display: LCD, blue backlight, character height 20mm.


New Replacement 15.6'' FHD LCD Screen LED Display + Touch Digitizer Assembly For HP ENVY x360 857439-001
New Replacement 15.6" FHD LCD Screen LED Display + Touch Digitizer Assembly For HP ENVY x360 857439-001
By for HP
In Stock
$260.00

mpn: 857439-001, ean: 8011475061382,

4.3 out of 5 stars with 62 reviews
IMPORTANT: Please check the Real Photos carefully before you purchase, the Size, Resolution and Connector Type must be same 100%. Shipping : Shipping by DHL Express (Normally we will declare the lower price on invoice for customs) Payment Police: The price and shipping & handling cost we required on Amazon do NOT include any customs duty or tax, Buyers should be responsible for the tax or custom of their purchase. Warranty : Provide a 120-day warranty against any manufacturer defective


Adafruit Medium 32x32 RGB LED matrix panel
Adafruit Medium 32x32 RGB LED matrix panel
By Adafruit
In Stock
$49.95

mpn: CRESCENT ENTERPRISES-267, ean: 0700253565171,

4.5 out of 5 stars with 29 reviews
Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls on the sides of busses and bus stops, to display animations or short video clips. They have 1024 bright RGB LEDs arranged in a 32x32 grid on the front on a 6mm grid. On the back there is a PCB with a set of dual IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the


HiLetgo 0.95'' Inch 7 Pin Colorful 65K SPI OLED Display Module SSD1331 9664 Resolution For 51 STM32 Arduino
HiLetgo 0.95" Inch 7 Pin Colorful 65K SPI OLED Display Module SSD1331 9664 Resolution For 51 STM32 Arduino
By HiLetgo®
In Stock
$12.49

mpn: 3-01-1401,

4.9 out of 5 stars with 136 reviews
Pin Description:1.GND-Gound2.VCC-Positive Voltage(2.8-5.5V)3.SCL-Clock Line4.SDA-Data Line5.RES-Reset6.DC-Data/Demand7.CS-Chip SelectThe use of OLED technology offers the following advantages for flat-panel displays?1. A simplified manufacturing process compared to TFT-LC2. Self-emitting light, in contrast to the required backlight for TFT-LCD3. High luminosity4. Lightweight and thin5. Capable of wide viewing angles6. Low operating voltage and power consumption7. Quick response8. Wide range


RAB Lighting ENTRA12 Entra 12W Cool LED 120V to 277V Wallmount Light, Bronze
RAB Lighting ENTRA12 Entra 12W Cool LED 120V to 277V Wallmount Light, Bronze
By RAB Lighting
In Stock
$85.50
$85.00

mpn: ENTRA12, ean: 0019813107059,

4.6 out of 5 stars with 146 reviews
ENTRA12 is a Rab Lighting 12W high-performance, low-maintenance LED doorway light. Suitable for mounting heights up to 10' and replaces 70W high pressure sodium. 100,000-Hour LED lifespan.Constant Current Driver. 89 LPW Efficacy. 5,000K Color Temp.


Adafruit 0.56'' 4-Digit 7-Segment Display w/I2C Backpack - White [ADA1002]
Adafruit 0.56" 4-Digit 7-Segment Display w/I2C Backpack - White [ADA1002]
By Adafruit
In Stock
$13.84
$12.81
You Save: 7%

mpn: ADA1002, ean: 7107565621893,

4.5 out of 5 stars with 103 reviews
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a


KEYART 2D/LED/25W/4000K   2D Retrofit Flat Panel LED, 25W 4000K
KEYART 2D/LED/25W/4000K 2D Retrofit Flat Panel LED, 25W 4000K
By KEYART
In Stock
$20.00

ean: 4897060740054,

4.0 out of 5 stars with 102 reviews
KEYART 2D LED is a direct retrofit replacement to your fluorescent 2D lamps. Designed to fit in the same fixtures, 2D LED features identical dimension to its fluorescent counter part. With as much as 5x the average life as a fluorescent 2D lamp, it's hassle and maintenance free after installation.State of the art retrofit design. High efficiency heat sink. Up to 5x life span as fluorescent 2D.


Gecko GKBDLK600GF Aeware, IN.K600 w/ LED Display & Menu-Driven Interface
Gecko GKBDLK600GF Aeware, IN.K600 w/ LED Display & Menu-Driven Interface
By GEC
In Stock
$198.70

mpn: GKBDLK600GF,

4.5 out of 5 stars with 72 reviews
Our aim is creating trendy and very unique spa accessories and pool accessories We do modifications testing trying to find a factory and a design that could be aesthetic Our backpack will be ideal from all with renewable durable and extremely strong patterns We design our products with easy setup and storage We value for our clients and encourage them with their passionFeatures. IN K600GF keypad with overlayIN. K600-GF keypad with overlay. Package Quantity: 1. Excellent Quality.. Great Gift



Viewing Page 2 of 4

View more products in Optoelectronic Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.