Pipe Taps - Blowout Sale! Save up to 55%


Blowout Sale! Up to 55% off on Pipe Taps at Steel City Robotics. Top brands include Irwin Tools, MaxTool, CMT, Drill America, RedLine Tools, KMIAN TOOLS, Drillco, Dormer, Luctool, Century Drill & Tool, Morse Cutting Tools, Ucostore, & Greenfield. Hurry! Limited time offers. Offers valid only while supplies last.



IRWIN 1910ZR Tap 2''-11 1/2'' Npt Pipe
IRWIN 1910ZR Tap 2"-11 1/2" Npt Pipe
By Irwin Tools
In Stock
$107.00
$60.02
You Save: 44%

mpn: 1910ZR, ean: 0640024889665,

4.5 out of 5 stars with 25 reviews
Tap 2''-11 1/2Npt Pipe''.1910Zr - Tap 2''-11 1/2Npt Pipe''. Made in the United States. Threading taps .


MaxTool 1/2''-14 NPT Tap (National Pipe Taper Tap); Quality High Speed Steel HSS M2; Fully Ground; NP02W00R032
MaxTool 1/2"-14 NPT Tap (National Pipe Taper Tap); Quality High Speed Steel HSS M2; Fully Ground; NP02W00R032
By MaxTool
In Stock
$34.92

mpn: NP02W00R032, ean: 0634301934759,

4.9 out of 5 stars with 60 reviews
MaxTool NPT Taps are made of Premium High Speed Steel M2, which meet National Pipe Taper (NPT) standard, and apply to cut internal threads in pipes; Ideal for pipe fittings and whenever an extremely tight fit is required. Fully ground threads and flutes make taps sharp, fast tapping and have outstanding center accuracy. The good surface Treatment and Multi-Flute design ensure smooth and easy chip ejection. Superior HSS M2 and Super Hardness (HRC63-66) guarantee to resist abrasion and long tool


CMT 2'' - 11-1/2 NPT PIPE TAP 88-0200
CMT 2" - 11-1/2 NPT PIPE TAP 88-0200
By CMT
In Stock
$39.99

mpn: 88-0200, ean: 0852672969105,

4.0 out of 5 stars with 127 reviews
Cuts internal threads in pipes; Nominal size of the tap is that of the pipe fitting being tapped; Available in National Pipe Taper (NPT); Ideal for pipe fittings; Specifications: Cuts intragroup threads in pipes; 2'' - 11-1/2 NPT; Nominal sizing of the tap is the sizing of the pipe meet existence abroach; Thread Standard = NPT; No. of Flutes = 6; Outside Cutting Direction = Right; Style = Taper; Applicable Materials = Most Metals; Material = High Carbon SteelCuts


Drill America DWT64118 Qualtech High-Speed Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/8''-18 NPS
Drill America DWT64118 Qualtech High-Speed Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/8"-18 NPS
By Drill America
In Stock
$21.12
$17.05
You Save: 19%

mpn: DWT64118, ean: 0887861076104,

4.0 out of 5 stars with 114 reviews
Drill America dwt series qualtech National pipe straight Taps marked NPS is suitable for tapping holes, or couplings, for low pressure work to assemble with taper threaded pipe or fittings to secure a tight joint when a sealer is used. It is suitable for npsc and NPSM work. High-speed steel tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or


RedLine Tools - 1/16-27 NPT - Taper Pipe Tap.6875 Thread Length 4 Flutes - RTB7001
RedLine Tools - 1/16-27 NPT - Taper Pipe Tap.6875 Thread Length 4 Flutes - RTB7001
By RedLine Tools
In Stock
$40.06

mpn: RTB7001,

4.6 out of 5 stars with 61 reviews
Tapping is one of the most critical operations in any shop. That's why you need high quality RedLine taps, which are proudly made in the USA. To provide superior precision and cutting control when working with a wide variety of materials, our high performance taps as well as general-purpose taps deliver every time. Our offering includes: spiral point taps, spiral flute taps, gun taps, form taps, as well as a variety of other types..3125 Shank Length. Cobalt, Vanadium, PM substrate. Black Oxide


G 1/8'' - 28 HSS BSP Parallel British Standard Pipe Tap
G 1/8" - 28 HSS BSP Parallel British Standard Pipe Tap
By KMIAN TOOLS
In Stock
$15.99

mpn: KM-Tap-G-1/8-28-right, ean: 0661757151874,

4.9 out of 5 stars with 110 reviews
Description: HSS 1/8''-28 BSP Parallel British Standard Pipe Tap Size: 1/8''-28 TPI Material: HSS Extra fine 28 Thread Per Inch.


Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4''-14 NPT (Pack of 1)
Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4"-14 NPT (Pack of 1)
By Drill America
In Stock
$13.01

mpn: DWTPT3/4, ean: 7147905896604,

4.6 out of 5 stars with 51 reviews
Drill America DWTPT series Qualtech carbon steel pipe tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.


RedLine Tools - 3/8-18 NPT - Taper Pipe Tap, 1.0625 Thread Length 4 Flutes - RT34208
RedLine Tools - 3/8-18 NPT - Taper Pipe Tap, 1.0625 Thread Length 4 Flutes - RT34208
By RedLine Tools
In Stock
$22.71

mpn: RT34208,

4.0 out of 5 stars with 113 reviews
Tapping is one of the most critical operations in any shop. That's why you need high quality RedLine taps, which are proudly made in the USA. To provide superior precision and cutting control when working with a wide variety of materials, our high performance taps as well as general-purpose taps deliver every time. Our offering includes: spiral point taps, spiral flute taps, gun taps, form taps, as well as a variety of other types..7000 Shank Length. HSS substrate. Black Oxide Finish. .5310


Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2''-14 Size
Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2"-14 Size
By Drillco
In Stock
$11.96
$5.35
You Save: 55%

mpn: 2700E132, ean: 0045996896213,

4.3 out of 5 stars with 100 reviews
Drillco nominal size of a taper pipe tap (NPT) is that of the pipe fitting to be tapped, not the actual size of the tap. Carbon steel taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Straight flute tools allow chips to collect in the


Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, 1/4''-19 Thread Size
Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, 1/4"-19 Thread Size
By Dormer
In Stock
$41.07
$40.28
You Save: 2%

mpn: E5471/4NO3, ean: 7320760099278,

4.9 out of 5 stars with 118 reviews
The Dormer E547 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create British Standard Pipe Parallel (BSPP) right-hand threads in a range of materials. British Standard Pipe Parallel, also called the BSP G Series, is a standard thread configuration for parallel, or straight, pipe threads. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only


Dormer E710 High-Speed Steel Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, Modified Bottoming Chamfer, 1/8''-27 Thread Size
Dormer E710 High-Speed Steel Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, Modified Bottoming Chamfer, 1/8"-27 Thread Size
By Dormer
In Stock
$35.70
$32.83
You Save: 8%

mpn: E7101/8, ean: 7320760099889,

4.6 out of 5 stars with 45 reviews
The Dormer E710 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create NPT (National Pipe Taper) right-hand threads in a range of materials. NPT is an ANSI-standard thread configuration intended for use with a sealant to create a leak-free tapered pipe joint. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). The modified


Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, 1/8''-28 Thread Size
Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, 1/8"-28 Thread Size
By Dormer
In Stock
$36.80
$34.45
You Save: 6%

mpn: E5471/8NO1, ean: 7320760157169,

4.5 out of 5 stars with 45 reviews
The Dormer E547 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create British Standard Pipe Parallel (BSPP) right-hand threads in a range of materials. British Standard Pipe Parallel, also called the BSP G Series, is a standard thread configuration for parallel, or straight, pipe threads. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only


Dormer E710 High-Speed Steel Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, Modified Bottoming Chamfer, 1/4''-18 Thread Size
Dormer E710 High-Speed Steel Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, Modified Bottoming Chamfer, 1/4"-18 Thread Size
By Dormer
In Stock
$38.85
$35.16
You Save: 9%

mpn: E7101/4, ean: 7320760099872,

4.3 out of 5 stars with 127 reviews
The Dormer E710 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create NPT (National Pipe Taper) right-hand threads in a range of materials. NPT is an ANSI-standard thread configuration intended for use with a sealant to create a leak-free tapered pipe joint. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). The modified


IRWIN 1909ZR Tap 1 1/2''-11 1/2'' Npt Pipe
IRWIN 1909ZR Tap 1 1/2"-11 1/2" Npt Pipe
By Irwin Tools
In Stock
$77.88
$43.19
You Save: 45%

mpn: 1909ZR, ean: 0042526019098,

4.7 out of 5 stars with 115 reviews
Tap 1 1/2''-11 1/2Npt Pipe''.1909Zr - Tap 1 1/2''-11 1/2Npt Pipe''. Made in the United States. Threading taps .


Luctool 1/2-14 NPT Pipe Tap High Carbon Steel HCS Taper Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading.
Luctool 1/2-14 NPT Pipe Tap High Carbon Steel HCS Taper Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading.
By Luctool
In Stock
$18.00

ean: 0689756422047,

4.6 out of 5 stars with 28 reviews
1/2-14 NPT Pipe Tap High Carbon Steel HCS Taper Bright Finished Ground Thread · Thread Size: 1/2-14 · Thread Type: NPT · Thread Length: 1-3/8 '' · Overall Length: 3-1/8'' · Number of Flutes: 4 · Material: High Carbon Steel · Drill Size: 23/32'' Cone-Shaped thread, feed according to the pitch, need high torque.Luctool provides threading tools including taps, dies and related products.. Our tools are widely applied on metal cutting, home improvement, thread repairing and construction....


Century Drill and Tool 95203 Plug Hand Pipe Tap, 3/8-18 NPT
Century Drill and Tool 95203 Plug Hand Pipe Tap, 3/8-18 NPT
By Century Drill & Tool
In Stock
$14.99
$7.67
You Save: 49%

mpn: 95203, ean: 0081838952037,

4.9 out of 5 stars with 10 reviews
Century's national pipe thread taps offer precision cut threads, accurately formed for consistent, exact threading.Heat treated and tempered for file hard threads, and longer, useful life. Designed for hand cutting applications. National pipe thread. Very strong and durable. Easy to use.


Morse Cutting Tools 36202 Taper Pipe Taps for Cast Iron, High-Speed Steel, Black Oxide Finish, NPT Thread, 4 Flutes, 1/8''-27'' Size
Morse Cutting Tools 36202 Taper Pipe Taps for Cast Iron, High-Speed Steel, Black Oxide Finish, NPT Thread, 4 Flutes, 1/8"-27" Size
By Morse Cutting Tools
In Stock
$17.36

mpn: 36202, ean: 0686125362027,

4.0 out of 5 stars with 107 reviews
Taper pipe taps for Cast Iron feature specific geometry for tapping materials that produce small or powdery chips. Recommended for cast iron, cast brass, and other brass materials and non-metals that produce small or powdery chips. NPT threads require the use thread sealant to ensure tight seal. Steam Oxide Over Nitride increases wear resistance, reduces friction, reduces galling and chip welding, improves chip flow and increases tap lubricant retention.List No. 2133. Taper Pipe Tap. For Cast


Drill America DWT Series Qualtech High-Speed Steel Right Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Plug Chamfer, 5/8''-27 Size (Pack of 1)
Drill America DWT Series Qualtech High-Speed Steel Right Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Plug Chamfer, 5/8"-27 Size (Pack of 1)
By Drill America
In Stock
$20.60
$17.96
You Save: 13%

mpn: DWTST5/8-27P, ean: 0887861087803,

4.9 out of 5 stars with 104 reviews
Drill America Qualtech DWT series hand taps are the most versatile taps for hand use or for tapping under power. Hand taps are popular for use in general machine tapping or CNC tapping. They are also appropriate for tapping the vast majority of materials in through or blind holed conditions. Plug style generally used in thru holes. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature


Hit Tools 22-HPT112 1-1/2''-11-1/2 NPT Chrome Carbon Alloy Steel Pipe Tap
Hit Tools 22-HPT112 1-1/2"-11-1/2 NPT Chrome Carbon Alloy Steel Pipe Tap
By Ucostore
In Stock
$36.29

ean: 0695320226164,

4.7 out of 5 stars with 65 reviews
Made of chrome carbon alloy steel and tempered. To be used to re-thread damaged or jammed threads or thread mild steel. Thread Size: 1-1/2-Inch. Thread/Inch: 11-1/2 NPT. Overall length: 4-1/4-Inch.


Greenfield 66230 | 1/2-14 Pipe Tap | 4-Flute NPTF USA
Greenfield 66230 | 1/2-14 Pipe Tap | 4-Flute NPTF USA
By Greenfield
In Stock
$22.00

mpn: 66230,

4.9 out of 5 stars with 38 reviews
Thread Size: 1/2-14. Thread Limit:. Class of Fit:. Chamfer:. Thread Standard: NPTF.



Viewing Page 1 of 4

View more products in Threading Taps.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.