Two Wing Slotting Cutters - Extreame Savings! Save up to 42%


Extreame Savings! Up to 42% off on Two Wing Slotting Cutters at Steel City Robotics. Top brands include Southeast Tool, Ewans, Woodline, Bosch, ValueMax Tools, Grizzly, Vermont American, & top-tool. Hurry! Limited time offers. Offers valid only while supplies last.



Southeast Tool STOP095 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore.095 KERF
By Southeast Tool
In Stock
$71.38
$68.37
You Save: 4%

mpn: STOP095,

4.9 out of 5 stars with 38 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


Southeast Tool STOP100 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore, .100" KERF
By Southeast Tool
In Stock
$68.23

mpn: STOP100,

4.4 out of 5 stars with 23 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


Featherboard Woodworking Feather Loc Board Set Multi-purpose Double Featherboards for Table Saws Band Saws Router Tables Fences Tools Miter Gauge Slot Woodworking Tools 1 Pair
By Ewans
In Stock
$49.99
$28.99
You Save: 42%

mpn: EW-013, ean: 0663577101664,

4.8 out of 5 stars with 65 reviews
Featherboard is made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure,that consistently produces cleaner cuts with less chance of kickback, chattering or lifting. Featherboard is essential for holding your stock firmly against your tool's guide fence and tabletop. Product Size: Thickness: approx. 0.63inch(16mm) Width: approx. 6.49inch(165mm) Total length: approx. 8.26inch(210mm)❶ This unique featherboard can be quickly and easily connected to


Woodline WL-0002 4.5mm Slot Cutter, 3/8" Depth of Cut, 1/4" Shank
By Woodline
In Stock
$17.25

mpn: WL-0002, ean: 0843392000643,

4.7 out of 5 stars with 122 reviews
Woodline USA's Slot cutter for making 4.5 mm slots in a variety of woodworking application. This slot cutter is bearing guided with a 5/32'' inch depth of cut and a ¼'' inch shank. Slot cutter are primarily used to create slots and grooves for T mouldings, spline joints, tongue and groove joints, and other applications. Can be used with both table and hand-held routers. Includes cutter, ball bearing and arbor.4.5mm Kerf. 3/8'' Depth of Cut. 1/4'' Shank. Carbide Tipped. Bearing Guided.


Bosch 85505M 1/4 In. Carbide Tipped 2-Wing Slotting Cutter Bit
By Bosch
In Stock
$20.25
$15.21
You Save: 25%

mpn: 85505M, ean: 0000346050523,

4.7 out of 5 stars with 21 reviews
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. For use in cutting slots, the two-wing slot cutter allows for faster feed rates. The fully hardened and tempered steel shank provides ultimate durability.Cuts slots for moldings, weather-stripping, and other edge details. Carbide tips on steel body for long life. Two-wing design for faster cutting. Bits must be inserted in the full length of the


Woodline WL-005 5/32" Slot Cutter, 5/16" Depth of Cut, 1-1/4" Overall Diameter, 1/4" Shank
By Woodline
In Stock
$22.75

mpn: WL-005, ean: 0843392017412,

4.2 out of 5 stars with 94 reviews
Woodline USA's Slot cutter for making 5/32'' slot in a variety of woodworking application. This slot cutter is bearing guided with a 5/16'' depth of cut and a ¼'' shank. Slot cutter are primarly used to create slots and grooves for T-mouldings, spline joints, tongue and groove joints, and other applications. Can be used with both table and hand-held routers. Includes cutter, ball bearing and arbor.5/32'' Kerf. 5/16'' Depth of Cut. 1/4'' Shank. Carbide Tipped with anti kickback design.. Bearing


Southeast Tool STOP140 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore.140 KERF
By Southeast Tool
In Stock
$69.48

mpn: STOP140,

4.2 out of 5 stars with 82 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


Woodline WL-006 5/32" Slot Cutter, 5/16" Depth of Cut, 1-1/4" Overall Diameter, 1/4" Shank
By Woodline
In Stock
$20.70

mpn: WL-006, ean: 0843392017429,

4.1 out of 5 stars with 17 reviews
Woodline USA's Slot cutter for making 5/32'' slot in a variety of woodworking application. This slot cutter is bearing guided with a 5/16'' depth of cut and a ¼'' shank. Slot cutter are primarly used to create slots and grooves for T-mouldings, spline joints, tongue and groove joints, and other applications. Can be used with both table and hand-held routers. Includes cutter, ball bearing and arbor.5/32'' Kerf. 5/16'' Depth of Cut. 1/4'' Shank. Carbide Tipped with anti kickback design.. Bearing


Woodline WL-003 Flooring Slot Cutter 3/16" Dia, 1/4" Depth, 1/4" Shank
By Woodline
In Stock
$20.70

mpn: WL-003, ean: 0843392000995,

4.1 out of 5 stars with 38 reviews
Woodline USA's Slot cutter for making 3/16'' slot in a variety of woodworking application. This slot cutter is bearing guided with a ¼'' depth of cut and a ¼'' shank. Slot cutter are primarly used to create slots and grooves for T-mouldings, spline joints, tongue and groove joints, and other applications. Can be used with both table and hand-held routers. Includes cutter, ball bearing and arbor.3/16. 1/4. Carbide Tipped with anti kickback design.. Bearing Guided.


Crown Molding Shaper Cutters - B 3/4 | D 3-1/4 | CL 2-1/4 | P A
By ValueMax Tools
In Stock
$131.09

mpn: K772825A,

4.7 out of 5 stars with 82 reviews
Crown Molding Shaper CuttersI M P O R T A N T! Select Size above based on Legend below!. B = Bore D = Diameter CL = Cutting Length P = Profile. 100% Satisfaction Guaranteed!.


Raised Panel Shaper Cutters - B 3/4 | D 4-5/8 | CL 5/8 | R 15/16 | DG - | P B
By ValueMax Tools
In Stock
$104.49

mpn: K8221175B-1,

4.7 out of 5 stars with 95 reviews
Raised Panel Shaper CuttersI M P O R T A N T! Select Size above based on Legend below!. B = Bore D = Diameter CL = Cutting Length R = Radius DG = Degree P = Profile. 100% Satisfaction Guaranteed!.


Southeast Tool STOP180 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore.180 KERF
By Southeast Tool
In Stock
$71.26
$70.43
You Save: 1%

mpn: STOP180,

4.4 out of 5 stars with 84 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


Grizzly H5910 T-Slot Cutter 5/16-Inch
By Grizzly
In Stock
$94.98

mpn: H5910, ean: 0690550159107,

4.7 out of 5 stars with 33 reviews
These 5/16'' T-Slot Cutters are made from high speed steel and feature right and left hand helix with side cutting teeth and 3/4'' straight shank with Weldon flats. They are used to cut T-slots in a previously cut straight slot. Dimensions indicate nominal width of T-slot or T-nut size to be used (not the actual cutting width).3/4'' straight shanks with Weldon flats. High speed steel. Right and left hand helix with side cutting teeth.


Woodline WL-001 1/8" Slot Cutter, 5/16" Depth of Cut, 1-1/4" Overall Diameter, 1/4" Shank
By Woodline
In Stock
$22.75

mpn: WL-001, ean: 0843392000797,

4.6 out of 5 stars with 71 reviews
Woodline USA's Slot cutter for making 1/8'' slot in a variety of woodworking application. This slot cutter is bearing guided with a 5/16'' depth of cut and a ¼'' shank. Slot cutter are primarly used to create slots and grooves for T-mouldings, spline joints, tongue and groove joints, and other applications. Can be used with both table and hand-held routers. Includes cutter, ball bearing and arbor.1/8'' Kerf. 5/16'' Depth of Cut. 1/4'' Shank. Carbide Tipped with anti kickback design.. Bearing


Woodline WL-007 9/64" Slot Cutter, 1/4" Depth of Cut, 1-1/4" Overall Diameter, 1/2" Shank
By Woodline
In Stock
$29.50

mpn: WL-007, ean: 0843392005747,

4.9 out of 5 stars with 105 reviews
9/64'' Kerf. 5/16'' Depth of Cut. 1/2'' Shank. Carbide Tipped with anti kickback design.. Bearing Guided.


Grizzly C2067 Panel Cutter Ogee with 3/4-Inch Bore
By Grizzly
In Stock
$78.95

mpn: C2067, ean: 0690550920677,

4.3 out of 5 stars with 14 reviews
Grizzly 3/4-Inch bore shaper cutters feature top-quality c-2 carbide--the best available for wood cutting applications. shaped and sharpened with diamond wheels as fine as 600 grit these outstanding cutters are constructed with a high-tensile silver-based brazing which offers the utmost in strength and durability. can be used on woods wood composites plywood and some plastics at 5 000 to 10 000 rpm. an excellent selection.Grizzly 3/4-Inch bore shaper cutters feature top-quality c-2 carbide--the


Southeast Tool STOP070 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore.070 KERF
By Southeast Tool
In Stock
$66.80

mpn: STOP070,

4.6 out of 5 stars with 85 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


1/8" to 1-1/8" Tube Cutter
By Vermont American
SKU: #HH-26811133
In Stock
$13.41

sku: HH-26811133, mpn: FBA_64102, ean: 0045325641026,

4.0 out of 5 stars with 85 reviews
TUBING CUTTER - For cutting copper, brass and aluminum to 1 1/4. Hardened-steel double rollers and wheels. Rectractable reamers. Cut quickly and accurately. For tubes 1/8 to 1-1/8 O.D..


Southeast Tool STOP170 2 Wing Cutter for Top master Machine, 2-1/2" Diameter X 3/8" Bore.170 KERF
By Southeast Tool
In Stock
$71.46
$71.32

mpn: STOP170,

4.7 out of 5 stars with 14 reviews
Carbide-Tipped Bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits Large DIAMETER be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.2 Wing Cutter. For TOPMASTER Machine. 2-1/2'' Diameter x 3/8'' Bore.


Aluminum Vinyl Floor Welding Wheeled Groover Grooving Slotting Machine Plastic Floor Mounting Tools (with 10PCS U Blades)
By top-tool
In Stock
$121.99

ean: 0749511484434,

4.5 out of 5 stars with 29 reviews
Aluminum Vinyl Floor Welding Wheeled Groover Grooving Slotting Machine Plastic Floor Mounting Tools Specifications: Application: PVC plastic floor slotting Name: guide wheel slotting device Material: aluminum alloy Blade: U type Size: 190x80x90MM Weight: 2KG Includes: 1 x Aluminum Vinyl Floor Welding Wheeled Groover 10 x Blades Fast shipping with DHL/FEDEX/UPS/EMS or other express shipping service!Application: PVC plastic floor slotting. Name: guide wheel slotting device. Material: aluminum



Viewing Page 1 of 2

View more products in Slotting Cutters.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.