Browse Our Catalog

Weld Nuts


Save on Weld Nuts at Steel City Robotics. Top brands include Newport Fasteners, Aspen Weld-Nuts, Electro Hardware, GRAINGER APPROVED, FABORY, RAW Products Corp, Fastenal Approved Vendor, & Jet Fitting & Supply Corp. Hurry! Limited time offers. Offers valid only while supplies last.



1/4''-20 Spot Weld Nut, Single Tab - Single Projection - Low Carbon Plain Steel (Quantity: 2700)
1/4"-20 Spot Weld Nut, Single Tab - Single Projection - Low Carbon Plain Steel (Quantity: 2700)
By Newport Fasteners
In Stock
$344.90

mpn: 282635-2700, ean: 9145252921374,

4.5 out of 5 stars with 129 reviews
A four-sided, internally threaded fastener with rounded edges at the two ends most opposite each other. The threaded hole is set off to one side and has a pilot for the entire circuference of the opening which extends above the flat surface of the nut. The remainder of the top surface of the nut is flat. This style weld nut is to be used with thinner gage metals to reinforce an area. The tab allows the installer to use multiple sizes of electrodes, thus improving efficiency by reducing


(1000 pcs) #10-32, Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.625'', AISI 304 Stainless Steel (18-8)
(1000 pcs) #10-32, Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.625", AISI 304 Stainless Steel (18-8)
By Aspen Weld-Nuts
In Stock
$607.00

mpn: AMST032-1032-001000,

4.8 out of 5 stars with 33 reviews
Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.625'', AISI 304 Stainless Steel (18-8)#10-32. Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.625'', AISI 304 Stainless Steel (18-8). Stainless Steel.


#10-32 Spot Weld Nut, 4 Projections - Low Carbon Plain Steel (Quantity: 5000)
#10-32 Spot Weld Nut, 4 Projections - Low Carbon Plain Steel (Quantity: 5000)
By Newport Fasteners
In Stock
$369.90

mpn: 771622-5000, ean: 9145252921473,

4.7 out of 5 stars with 45 reviews
A four-sided, internally threaded fastener with rounded edges at the two ends most opposite each other. The threaded hole runs through the center and has a pilot for the entire circuference of the opening which extends above the flat surface of the nut. Surrounding the hole in the four corners and on the same side of the nut as the pilot, are four identical round, dome-shaped protrusions of less height than the pilot. The four projections are designed to weld simultaneously, covering a greater


3/8-16 Multi-Projection Tab Weld Nuts/Steel/Plain (Carton: 1,000 pcs)
3/8-16 Multi-Projection Tab Weld Nuts/Steel/Plain (Carton: 1,000 pcs)
By Newport Fasteners
In Stock
$166.99

mpn: 331397, ean: 8945136473835,

4.6 out of 5 stars with 111 reviews
Weld Nuts, 3/8-16 Multi-Projection Tab Weld Nuts / Steel / PlainTab Weld Nuts. Center Hole, Multiple Projection Style. 1006 - 1010 Low Carbon Steel. Plain Finish.


#10-24 Spot Weld Nut, Single Tab - Low Carbon Plain Steel (Quantity: 5000)
#10-24 Spot Weld Nut, Single Tab - Low Carbon Plain Steel (Quantity: 5000)
By Newport Fasteners
In Stock
$418.90

mpn: 938427-5000, ean: 9145252921763,

4.2 out of 5 stars with 43 reviews
The Single Tab weld nut (economy t nut) is a spot weld, precision-pilot nut which features an optimum welding tab. This tab will take several sizes of electrodes and permits use of the same equipment, settings and electrodes used to produce your product or product components. Where the nut is to function as a stiffener or brace in addition to being a fastener, this Single Tab weld nut is ideal.C1010 High-Welding Quality, Low Carbon Steel, Unified Standard Class 2B ASME B 1.1-2003. Compare to


#6-32, 0.34'' Body Diam, Round Head, Steel Weld Nut pack of 10
#6-32, 0.34" Body Diam, Round Head, Steel Weld Nut pack of 10
By Electro Hardware
In Stock
$169.28

mpn: NA, ean: 7439556552528,

4.5 out of 5 stars with 26 reviews
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.Specification:Head Shape : RoundSystem of Measurement : InchThread Size (Inch) : #6-32Body Diameter (Decimal Inch) : 0.3400Pilot Height (Decimal Inch) : 0.0930Minimum Panel Thickness (Decimal Inch) : 0.0300Material : SteelPilot Hole Diameter (Decimal Inch) : 0.1930Number of Projections : 3Finish/Coating : Copper FlashHead Shape :


1/4''-20 Tab Base Weld Nut with Offset Hole, Steel, PK50
1/4"-20 Tab Base Weld Nut with Offset Hole, Steel, PK50
By GRAINGER APPROVED
In Stock
$80.70

mpn: NA, ean: 7111833074281,

4.8 out of 5 stars with 7 reviews
Tab Base Weld NutsNuts with offset hole have a single projection and can be used to reinforce or brace an area, while nuts with a center hole have multiple projections and provide the greatest weld strength.Hex Base Weld Nuts Pkg. of 50Allow rapid installation into holes prior to welding. Steel material.Specification: Item: Weld NutNut Style: Tab Base Weld Nut with Offset HoleSystem of Measurement: InchBasic Material: SteelFastener Finish: PlainFastener Thread Direction: Right HandDia./Thread


M8-1.25 Square Weld Nut, Steel, DIN 928, PK100
M8-1.25 Square Weld Nut, Steel, DIN 928, PK100
By FABORY
In Stock
$45.06

mpn: NA, ean: 7439542019011,

4.3 out of 5 stars with 128 reviews
Specification: Item: Weld NutNut Style: Square Weld NutSystem of Measurement: MetricBasic Material: SteelFastener Finish: PlainFastener Thread Direction: Right HandDia./Thread Size: M8-1.25Fastener Thread Type: MetricNut Standards: DIN 928''Item: Weld Nut. Nut Style: Square Weld Nut. System of Measurement: Metric. Basic Material: Steel. Fastener Finish: Plain.


Hex Weld Nuts Steel Short Pilot 6 Projections - UNC Coarse Sizes - QTY 100 (5/16"-18)
By RAW Products Corp
In Stock
$21.29

ean: 0793244347887,

4.9 out of 5 stars with 39 reviews
Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side. The 6 projections on weld nuts melt into the host material during welding providing superior contact with the weld surface while the short pilot helps to ensure a precise installation without slipping off the center during welding.Plain Steel 6 Projection Short Pilot Weld Nuts. Hexagonal Shape for High Torque Resistance. 6


Hex Weld Nuts Steel Long Pilot 3 Projections - UNC Coarse Sizes - QTY 250 (3/8''-16)
Hex Weld Nuts Steel Long Pilot 3 Projections - UNC Coarse Sizes - QTY 250 (3/8"-16)
By RAW Products Corp
In Stock
$41.66

ean: 0793244348112,

4.7 out of 5 stars with 77 reviews
Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side. The 3 projections on weld nuts melt into the host material during welding for a quick and enduring hold while the long pilot helps to ensure a precise installation without slipping off the center and protecting the threads from welding spatter during welding operations.Plain Steel 3 Projection Long Pilot Weld Nuts. Hexagonal


#10-32 Spot Weld Nut
#10-32 Spot Weld Nut
By Fastenal Approved Vendor
In Stock
$75.95
4.3 out of 5 stars with 137 reviews
Specification:Pilot Center To End Length: 0.168'' - 0.208''Nut Width: 0.433'' - 0.453''Pilot Height: 0.025'' - 0.042''Thread Size: 32Nut Thickness: 0.091'' - 0.097''Diameter-Thread Size: #10-32Pilot Diameter: 0.224'' - 0.244''Pilot Hole: 0.250''Style: StandardFinish: PlainDiameter: #10Material: SteelNumber of Projections: 0Type: Spot Weld NutNut Length: 0.797'' - 0.827''System of Measurement: Imperial (Inch)Product Weight: 0.0095UOM: eachCatalog Page: BBV11, Page 01-133Notes: Spot Weld Nuts are


14-20 Tab Weld Nuts | Offset Hole Design; .812?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
14-20 Tab Weld Nuts | Offset Hole Design; .812?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
By Jet Fitting & Supply Corp
In Stock
$661.99

mpn: 14NWS1SS,

4.4 out of 5 stars with 134 reviews
14-20 Tab Weld Nuts | Offset Hole Design; .812?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)Tab Weld Nuts. Offset Hole Design; .812?? Tab Base, Without Projections. 18-8 Stainless Steel. 0.


5/16-24 Tab Weld Nuts | Offset Hole Design; 1 1/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
5/16-24 Tab Weld Nuts | Offset Hole Design; 1 1/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
By Jet Fitting & Supply Corp
In Stock
$990.99

mpn: 32NWS1SS,

4.5 out of 5 stars with 53 reviews
5/16-24 Tab Weld Nuts | Offset Hole Design; 1 1/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)Tab Weld Nuts. Offset Hole Design; 1 1/8?? Tab Base, Without Projections. 18-8 Stainless Steel. 0.


10-32 Tab Weld Nuts | Offset Hole Design; 5/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
10-32 Tab Weld Nuts | Offset Hole Design; 5/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)
By Jet Fitting & Supply Corp
In Stock
$507.99

mpn: 11NWS1SS,

4.9 out of 5 stars with 78 reviews
10-32 Tab Weld Nuts | Offset Hole Design; 5/8?? Tab Base, Without Projections | 18-8 Stainless Steel (QUANTITY: 1000)Tab Weld Nuts. Offset Hole Design; 5/8?? Tab Base, Without Projections. 18-8 Stainless Steel. 0.


M8-1.25-6H Spot Weld Nut, 4 Projections - Low Carbon Plain Steel (Quantity: 1800)
M8-1.25-6H Spot Weld Nut, 4 Projections - Low Carbon Plain Steel (Quantity: 1800)
By Newport Fasteners
In Stock
$255.90

mpn: 684944-1800, ean: 9145252921428,

4.8 out of 5 stars with 74 reviews
A four-sided, internally threaded fastener with rounded edges at the two ends most opposite each other. The threaded hole runs through the center and has a pilot for the entire circuference of the opening which extends above the flat surface of the nut. Surrounding the hole in the four corners and on the same side of the nut as the pilot, are four identical round, dome-shaped protrusions of less height than the pilot. The four projections are designed to weld simultaneously, covering a greater


1/2''-13 Tab Base Weld Nut with Projections, Steel, PK50
1/2"-13 Tab Base Weld Nut with Projections, Steel, PK50
By GRAINGER APPROVED
In Stock
$93.50

mpn: NA, ean: 7438048973995,

4.2 out of 5 stars with 131 reviews
Tab Base Weld NutsNuts with offset hole have a single projection and can be used to reinforce or brace an area, while nuts with a center hole have multiple projections and provide the greatest weld strength.Hex Base Weld NutsPkg. of 50Allow rapid installation into holes prior to welding. Steel material.Specifications:Item: Weld NutNut Style: Tab Base Weld Nut with ProjectionsSystem of Measurement: InchBasic Material: SteelFastener Finish: PlainFastener Thread Direction: Right HandDia./Thread


Hex Weld Nuts Steel Short Pilot 6 Projections - UNC Coarse Sizes - QTY 250 (1/4''-20)
Hex Weld Nuts Steel Short Pilot 6 Projections - UNC Coarse Sizes - QTY 250 (1/4"-20)
By RAW Products Corp
In Stock
$35.32

ean: 0793244348051,

4.3 out of 5 stars with 129 reviews
Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side. The 6 projections on weld nuts melt into the host material during welding providing superior contact with the weld surface while the short pilot helps to ensure a precise installation without slipping off the center during welding.Plain Steel 6 Projection Short Pilot Weld Nuts. Hexagonal Shape for High Torque Resistance. 6


(1000 pcs) 1/4''-20, Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.812'', AISI 304 Stainless Steel (18-8)
(1000 pcs) 1/4"-20, Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.812", AISI 304 Stainless Steel (18-8)
By Aspen Weld-Nuts
In Stock
$798.00

mpn: AMST033-1420-001000,

4.9 out of 5 stars with 121 reviews
Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.812'', AISI 304 Stainless Steel (18-8)1/4''-20. Weld Nuts, Spot Tab Type, Offset Hole, No Projections, Tab Base 0.812'', AISI 304 Stainless Steel (18-8). Stainless Steel.


(1000 pcs) 1/2''-13, Weld Nuts, Spot Tab Type, Center Hole, No Projections, C1006-C1010 Steel, Plain
(1000 pcs) 1/2"-13, Weld Nuts, Spot Tab Type, Center Hole, No Projections, C1006-C1010 Steel, Plain
By Aspen Weld-Nuts
In Stock
$633.58

mpn: AMNU118-1213-001000,

4.2 out of 5 stars with 45 reviews
Weld Nuts, Spot Tab Type, Center Hole, No Projections, C1006-C1010 Steel, Plain1/2''-13. Weld Nuts, Spot Tab Type, Center Hole, No Projections, C1006-C1010 Steel, Plain. Steel.


Hex Weld Nuts Steel Short Pilot 3 Projections - UNC Coarse Sizes - QTY 100 (1/4''-20)
Hex Weld Nuts Steel Short Pilot 3 Projections - UNC Coarse Sizes - QTY 100 (1/4"-20)
By RAW Products Corp
In Stock
$17.38

ean: 0793244347832,

4.7 out of 5 stars with 27 reviews
Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side. The 3 projections on weld nuts melt into the host material during welding for a quick and enduring hold while the short pilot helps to ensure a precise installation without slipping off the center during welding.Plain Steel 3 Projection Short Pilot Weld Nuts. Hexagonal Shape for High Torque Resistance. 3 Projections for Quick,



Viewing Page 1 of 6

View more products in Nuts.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - steelcityrobotics.org. All Rights Reserved.